Description:The ICL232 is a dual RS-232 transmitter/receiver interface circuit that meets all ElA RS-232C and V. 28 specifications. It requires a single +5V power supply, and features two onboard charge pump voltage converters which generate +10V and -10V supplies from the 5V supply. The drivers feature true TTL/CMOS input compatibility, slewrate- limited output, and 300Ω power-off source impedance. The receivers can handle up to +30V, and have a 3kΩ to 7kΩ input impedance. The receivers also have hysteresis to improve
A good PCB layout for the ICL232CBEZT should consider the following: keep the analog and digital grounds separate, use a solid ground plane, and keep the signal traces short and away from noise sources. A 4-layer PCB with a dedicated ground plane is recommended.
To ensure reliable communication in noisy environments, use a shielded cable, twisted pair wiring, and implement common-mode filtering. Additionally, consider using a common-mode choke or a ferrite bead to reduce electromagnetic interference (EMI).
The maximum cable length supported by the ICL232CBEZT depends on the baud rate and the type of cable used. As a general rule, the maximum cable length is around 100 feet (30 meters) at 9600 bps, but it can be shorter at higher baud rates. It's recommended to use a cable with a characteristic impedance of 120 ohms and a twisted pair construction.
The ICL232CBEZT has built-in error detection and correction mechanisms, such as parity checking and framing error detection. To handle errors and exceptions, implement a robust error handling mechanism in your firmware, including error detection, reporting, and recovery procedures.
The power consumption of the ICL232CBEZT depends on the operating mode and the supply voltage. In typical operating conditions, the power consumption is around 10 mA at 3.3V supply voltage. However, it can be as low as 1 mA in low-power mode.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
ICL232CBEZT Overview
Use the download button to access the ICL232CBEZT schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like ICL23,
or try a keyword search, such as Line Driver or Receivers
Suggested Parts
If you searched for ICL232CBEZT, you might also be interested in these parts:
