The maximum voltage rating of the bootstrap capacitor should be at least 2x the maximum voltage of the VCC supply, typically 15V to 20V.
Ensure the bootstrap capacitor is properly charged by providing a low-impedance path from the VCC supply to the bootstrap capacitor, and by using a suitable resistor value for the bootstrap resistor (RBOOT).
The recommended value for the bootstrap resistor (RBOOT) is typically in the range of 1kΩ to 10kΩ, depending on the specific application and VCC supply voltage.
The dead time between the high-side and low-side switches can be handled by using the internal dead time generator or by using an external dead time generator circuit. The recommended dead time is typically in the range of 100ns to 500ns.
The maximum switching frequency supported by the IR2130 is typically up to 500kHz, but it depends on the specific application, layout, and component selection.
Trust Checks
This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
IR2130 Overview
Use the download button to access the IR2130 schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like IR213,
or try a keyword search, such as MOSFET Drivers
Suggested Parts
If you searched for IR2130, you might also be interested in these parts: