The IR2153 has a maximum voltage rating of 600V, making it suitable for high-voltage applications.
Proper thermal management can be achieved by providing a heat sink, ensuring good airflow, and keeping the device away from heat sources. The IR2153 has a thermal pad that should be connected to a heat sink or a copper plane on the PCB.
The bootstrap capacitor is used to generate the high-side gate drive voltage. It is charged through the bootstrap diode and discharged through the high-side FET, allowing the high-side FET to be driven.
The bootstrap capacitor value depends on the switching frequency, high-side FET gate charge, and the desired voltage ripple. A general guideline is to choose a capacitor with a value between 10nF to 100nF.
The recommended dead time for the IR2153 is typically around 100-200ns, but it may vary depending on the specific application and switching frequency.
Trust Checks
This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
IR2153 Overview
Use the download button to access the IR2153 schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like IR215,
or try a keyword search, such as MOSFET Drivers
Suggested Parts
If you searched for IR2153, you might also be interested in these parts: