Description:The ISL28233 is a dual micropower, chopper stabilized operational amplifier that is optimized for single and dual supply operation from 1.65V to 6.0V and ±0.825V to ±3.0V. Its low supply current of 18µA and wide input range enable the ISL28233 to be an excellent general purpose op amp for a wide range of applications. This op amp is ideal for handheld devices that operate off 2 AA or single Li-ion batteries. The ISL28233 is available in 8 Ld MSOP, 8 Ld SOIC and 8 Ld DFN packages and operates over the temper
A good PCB layout is crucial for optimal performance. Renesas recommends a 4-layer PCB with a solid ground plane, and to keep the analog and digital grounds separate. Additionally, place the input and output capacitors close to the IC, and use short, wide traces for the power lines.
To ensure stability, ensure that the output capacitor is properly sized and placed close to the IC. Also, make sure the input capacitor is properly bypassed, and the feedback resistors are properly selected. Additionally, consider adding a small capacitor (e.g., 10nF) in parallel with the feedback resistors to improve stability.
The maximum allowed input voltage ripple is not explicitly stated in the datasheet. However, as a general rule, it's recommended to keep the input voltage ripple below 1% of the nominal input voltage to ensure proper operation and minimize output voltage ripple.
While the datasheet recommends a specific inductor value and type, you can use a different one if necessary. However, be aware that this may affect the converter's performance, efficiency, and stability. Make sure to re-calculate the component values and re-evaluate the design using the new inductor characteristics.
The ISL28233FBZ-T7A has a thermal pad on the bottom of the package. Ensure good thermal contact between the pad and the PCB by using a thermal interface material (e.g., thermal tape or thermal grease). Also, consider adding thermal vias or a heat sink to improve heat dissipation, especially in high-power applications.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
ISL28233FBZ-T7A Overview
Use the download button to access the ISL28233FBZ-T7A schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like ISL28,
or try a keyword search, such as Operational Amplifiers
