Please enter a minimum 3 letters or numbers
Technical Content
Part Image

ISL6614ACBZ-T - Renesas Electronics

Description: The ISL6614A integrates two ISL6613A MOSFET drivers and is specifically designed to drive two Channel MOSFETs in a synchronous rectified buck converter topology. These drivers combined with HIP63xx or ISL65xx Multiphase Buck PWM controllers and N-Channel MOSFETs form complete core voltage regulator solutions for advanced microprocessors. The ISL6614A drives both the upper and lower gates simultaneously over a range from 5V to 12V. This drive voltage provides the flexibility necessary to optimize application

Download ISL6614ACBZ-T Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
Send part feedback
Symbol
ISL6614ACBZ-T - Renesas Electronics - PCB symbol
click to zoom
PCB Footprints
ISL6614ACBZ-T - Renesas Electronics PCB footprint - Small Outline Packages - Small Outline Packages - M14.15
click to zoom
3D Models
ISL6614ACBZ-T - Renesas Electronics - 3D model - Small Outline Packages - M14.15
click to zoom

ISL6614ACBZ-T Details

  • Manufacturer Part Number:

    ISL6614ACBZ-T

  • Brand Name:

    Renesas

  • Pbfree Code:

    Yes

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Obsolete

  • Part Package Code:

    SOICN

  • Package Description:

    SOIC-14

  • Pin Count:

    14

  • Manufacturer Package Code:

    M14.15

  • ECCN Code:

    EAR99

  • HTS Code:

    8542.39.00.60

  • Factory Lead Time:

    4 Weeks

  • Manufacturer:

    Renesas Electronics Corporation

  • YTEOL:

    0

  • High Side Driver:

    YES

  • Interface IC Type:

    HALF BRIDGE BASED MOSFET DRIVER

  • JESD-30 Code:

    R-PDSO-G14

  • JESD-609 Code:

    e3

  • Length:

    8.65 mm

  • Moisture Sensitivity Level:

    3

  • Number of Functions:

    1

  • Number of Terminals:

    14

  • Operating Temperature-Max:

    85 °C

  • Output Characteristics:

    PUSH-PULL

  • Output Peak Current Limit-Nom:

    3 A

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    SOP

  • Package Equivalence Code:

    SOP14,.25

  • Package Shape:

    RECTANGULAR

  • Package Style:

    SMALL OUTLINE

  • Peak Reflow Temperature (Cel):

    260

  • Seated Height-Max:

    1.75 mm

  • Supply Voltage-Max:

    13.2 V

  • Supply Voltage-Min:

    10.8 V

  • Supply Voltage-Nom:

    12 V

  • Supply Voltage1-Max:

    13.2 V

  • Supply Voltage1-Min:

    4.5 V

  • Supply Voltage1-Nom:

    12 V

  • Surface Mount:

    YES

  • Terminal Finish:

    MATTE TIN

  • Terminal Form:

    GULL WING

  • Terminal Pitch:

    1.27 mm

  • Terminal Position:

    DUAL

  • Time@Peak Reflow Temperature-Max (s):

    30

  • Turn-off Time:

    0.01 µs

  • Turn-on Time:

    0.01 µs

  • Width:

    3.9 mm

ISL6614ACBZ-T Frequently Asked Questions (FAQs)

  • The recommended PCB layout for optimal performance involves keeping the high-current paths short and wide, using a solid ground plane, and placing the input and output capacitors close to the IC. A 4-layer board with a dedicated power plane and a solid ground plane is recommended. Additionally, it's essential to follow the layout guidelines provided in the datasheet and application notes.
  • The selection of input and output capacitors depends on the specific requirements of your design, such as the input voltage, output voltage, and current rating. In general, low-ESR capacitors with high ripple current ratings are recommended. The datasheet provides guidelines for capacitor selection, and it's essential to follow the recommended values and types to ensure stable operation.
  • The maximum operating temperature range for the ISL6614ACBZ-T is -40°C to +125°C. However, the device's performance and reliability may degrade at higher temperatures, so it's essential to ensure proper thermal management and heat sinking in your design.
  • The ISL6614ACBZ-T has a built-in overcurrent protection feature that can be enabled by connecting the OCP pin to a resistor and capacitor network. The datasheet provides a detailed description of the overcurrent protection circuit and the recommended component values.
  • The recommended voltage rating for the input and output capacitors is at least 1.5 times the maximum input voltage and output voltage, respectively. For example, if the maximum input voltage is 12V, the input capacitor should be rated for at least 18V.

Trust Checks

This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

ISL6614ACBZ-T Overview

Use the download button to access the ISL6614ACBZ-T schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like ISL66, or try a keyword search, such as MOSFET Drivers

Parts related to ISL6614ACBZ-T

Showing 0 results

Part Image

← Prev Next →
About Us Contact Us Terms of Service Do not sell or share my personal information Privacy Policy Digital Services Act Library Loader Twitter LinkedIn

All content Copyright © 2020, Supplyframe.com. All rights reserved. Back to top ↑

ISL6614ACBZ-T Alternates

Showing results

Image Part Number Model
Part Image ISL6614ACBZ Intersil Corporation

Half Bridge Based MOSFET Driver, PDSO14
Part Image ISL6614ACB-T Intersil Corporation

Half Bridge Based MOSFET Driver, 3A, PDSO14
Part Image ISL6614ACBZA-T Renesas Electronics Corporation

Half Bridge Based MOSFET Driver, 3A, PDSO14
Part Image ISL6614ACB Renesas Electronics Corporation

Half Bridge Based MOSFET Driver, 3A, PDSO14
Part Image ISL6614AIB-T Intersil Corporation

Half Bridge Based MOSFET Driver, 3A, PDSO14
For a full list of alternate parts for ISL6614ACBZ-T, check out Findchips.com