Description:The ISL8025, ISL8025A are highly efficient, monolithic, synchronous step-down DC/DC converters that can deliver 5A of continuous output current from a 2. 7V to 5. 5V input supply. The devices use current mode control architecture to deliver a very low duty cycle operation at high frequency with fast transient response and excellent loop stability. The ISL8025, ISL8025A integrates a very low ON-resistance P-Channel (36mΩ) high-side FET and N-Channel (13mΩ) low-side FET to maximize efficiency and minimize ext
Renesas provides a recommended PCB layout guide in their application note AN1965, which includes guidelines for thermal vias, copper pours, and component placement to minimize thermal resistance and ensure optimal performance.
To ensure reliable start-up and shutdown, it is recommended to follow the power-up and power-down sequencing guidelines outlined in the datasheet, and to use a soft-start circuit to limit inrush current. Additionally, a capacitor should be placed between the VIN and GND pins to filter out noise and ensure stable operation.
The maximum allowable voltage on the EN pin is 6V, as specified in the datasheet. Exceeding this voltage may damage the device. It is recommended to use a voltage divider or a level shifter to ensure the EN pin voltage remains within the specified range.
To optimize output voltage accuracy and stability, it is recommended to use a high-precision voltage reference, such as the ISL23301, and to follow the layout guidelines outlined in the datasheet to minimize noise and interference. Additionally, the output voltage can be adjusted using the FB pin, and the output voltage accuracy can be improved by using a feedback resistor with a low temperature coefficient.
Renesas recommends using a low-ESR ceramic capacitor with a value of 10uF to 22uF for the input capacitor. This helps to filter out noise and ensure stable operation. The capacitor should be placed as close as possible to the VIN pin to minimize parasitic inductance.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
ISL8025IRTAJZ Overview
Use the download button to access the ISL8025IRTAJZ schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like ISL80,
or try a keyword search, such as Switching Regulator or Controllers
