Description:The Intersil ISL84781 device contains precision, bidirectional, analog switches configured as an 8-channel multiplexer/demultiplexer. It is designed to operate from a single +1. 6V to +3. 6V supply. The device has an inhibit pin to simultaneously open all signal paths. ON-resistance is 0. 4Ω with a +3. 0V supply and 0. 55Ω with a single +1. 8V supply. Each switch can handle rail-to-rail analog signals. The off-leakage current is only 4nA max at +25°C or 40nA max at +85°C with a +3. 3V supply. All digital in
A good PCB layout for the ISL84781IVZ-T7A involves keeping the analog and digital grounds separate, using a solid ground plane, and minimizing the length of the traces between the device and the capacitors. A 4-layer PCB with a dedicated power plane and a dedicated ground plane is recommended.
To ensure proper power-up and configuration of the ISL84781IVZ-T7A, follow the recommended power-up sequence, which involves applying VCC before applying VDD. Also, make sure to configure the device correctly by setting the correct logic levels on the EN and SLEEP pins.
The ISL84781IVZ-T7A has a maximum junction temperature of 150°C. To ensure reliable operation, it's essential to provide adequate heat sinking and thermal management. A thermal pad on the bottom of the package helps to dissipate heat, and a thermal interface material can be used to improve heat transfer.
To troubleshoot issues with the ISL84781IVZ-T7A, start by checking the power supply voltages and ensuring that the device is properly configured. Use an oscilloscope to check the signal waveforms and verify that the device is operating within the specified parameters. Consult the datasheet and application notes for guidance on troubleshooting specific issues.
The ISL84781IVZ-T7A has built-in ESD protection, but it's still essential to follow proper ESD handling procedures during assembly and testing. Use an ESD wrist strap or mat, and ensure that the device is stored in an ESD-safe environment.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
ISL84781IVZ-T7A Overview
Use the download button to access the ISL84781IVZ-T7A schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like ISL84,
or try a keyword search, such as Multiplexers or Switches
