Description:The ISL854102 is a 1. 2A synchronous buck regulator with an input range of 3V to 40V. It provides an easy-to-use, high efficiency, low BOM count solution for a variety of applications. The ISL854102 integrates both high-side and low-side NMOS FETs and features a PFM mode for improved efficiency at light loads. This feature can be disabled if a forced PWM mode is needed. The ISL854102 switches at a default frequency of 500kHz; however, it can also be programmed using an external resistor from 300kHz to 2MHz.
A good PCB layout for the ISL854102FRZ-T involves keeping the input and output capacitors close to the IC, using a solid ground plane, and minimizing the length of the traces between the IC and the capacitors. A 4-layer PCB with a dedicated power plane and a solid ground plane is recommended.
To ensure stability and prevent oscillations, it's essential to follow the recommended component values and PCB layout guidelines. Additionally, make sure to use a sufficient output capacitor with a low ESR (Equivalent Series Resistance) and a high-quality input capacitor with a low ESL (Equivalent Series Inductance).
The ISL854102FRZ-T is rated for operation from -40°C to +125°C, but the maximum ambient temperature range for reliable operation depends on the specific application and the thermal design of the system. As a general guideline, it's recommended to keep the junction temperature below 125°C to ensure reliable operation.
The power dissipation of the ISL854102FRZ-T can be calculated using the formula: Pd = (Vin - Vout) x Iout. The junction temperature can be estimated using the thermal resistance (RθJA) and the power dissipation: Tj = Ta + (RθJA x Pd), where Ta is the ambient temperature.
The recommended input capacitor is a 10uF to 22uF ceramic capacitor with a low ESR (Equivalent Series Resistance) and a high-quality dielectric material such as X5R or X7R. The recommended output capacitor is a 10uF to 47uF ceramic capacitor with a low ESR and a high-quality dielectric material.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
ISL854102FRZ-T Overview
Use the download button to access the ISL854102FRZ-T schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like ISL85,
or try a keyword search, such as Switching Regulator or Controllers
