Description:The ISL85418 is a 800mA synchronous buck regulator with an input range of 3V to 40V. It provides an easy-to-use, high efficiency low BOM count solution for a variety of applications. The ISL85418 integrates both high-side and low-side NMOS FETs and features a PFM mode for improved efficiency at light loads. This feature can be disabled if forced PWM mode is needed. The ISL85418 switches at a default frequency of 500kHz; however, it can also be programmed using an external resistor from 300kHz to 2MHz. The I
Renesas provides a recommended PCB layout in the ISL85418FRZ-T evaluation board user manual, which includes guidelines for component placement, thermal management, and routing. Following this layout can help ensure optimal performance and minimize noise and EMI issues.
The selection of input and output capacitors depends on the specific requirements of your application, including the input voltage range, output current, and desired ripple and noise performance. Renesas provides guidance on capacitor selection in the datasheet and application notes, and recommends using low-ESR capacitors with a voltage rating that exceeds the maximum input voltage.
While the datasheet specifies an operating temperature range of -40°C to +125°C, the maximum ambient temperature range for reliable operation depends on the specific application and thermal management. In general, Renesas recommends keeping the junction temperature below 125°C to ensure reliable operation and minimize thermal-related failures.
To ensure EMC in your design, follow Renesas' guidelines for PCB layout, component selection, and shielding. Additionally, consider using EMI filters, ferrite beads, and other noise-reducing components to minimize radiated and conducted emissions. Renesas also provides EMC-related application notes and design guides to help with compliance.
Renesas recommends a specific startup sequence to ensure proper operation and minimize the risk of damage or malfunction. The recommended sequence is: 1) Apply input voltage, 2) Apply enable signal, and 3) Apply output load. This sequence helps prevent unwanted startup behavior and ensures that the device is properly initialized.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
ISL85418FRZ-T Overview
Use the download button to access the ISL85418FRZ-T schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like ISL85,
or try a keyword search, such as Switching Regulator or Controllers
