Description:The Intersil ISL95310 is a digitally controlled potentiometer (XDCP). The device consists of a resistor array, wiper switches, a control section, and nonvolatile memory. The wiper position is controlled by an Up/Down interface. The potentiometer is implemented by a resistor array composed of 127 resistive elements and a wiper switching network. Between each element and at either end are tap points accessible to the wiper terminal. The wiper of each potentiometer has an associated volatile Wiper Counter Regi
A good PCB layout for the ISL95310UIU10Z-TK involves keeping the input and output capacitors close to the IC, using a solid ground plane, and minimizing the length of the traces between the IC and the capacitors. Additionally, it's recommended to use a 4-layer PCB with a dedicated power plane and a dedicated ground plane.
To ensure the stability of the output voltage, it's essential to choose the correct output capacitor value and type. A minimum capacitance of 10uF is recommended, and the capacitor should have a low ESR (Equivalent Series Resistance) to minimize voltage ripple. Additionally, the output voltage can be stabilized by adding a small ceramic capacitor (e.g., 1uF) in parallel with the main output capacitor.
The ISL95310UIU10Z-TK can handle a maximum input voltage of 18V. However, it's recommended to operate the device within the specified input voltage range of 6.5V to 16V for optimal performance and reliability.
The ISL95310UIU10Z-TK is a programmable voltage regulator, and the output voltage can be programmed using an external resistor divider network. The output voltage is determined by the ratio of the resistors in the divider network. The datasheet provides a formula to calculate the required resistor values for a specific output voltage.
The thermal shutdown temperature of the ISL95310UIU10Z-TK is typically 150°C. When the junction temperature exceeds this value, the device will shut down to prevent damage.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
ISL95310UIU10Z-TK Overview
Use the download button to access the ISL95310UIU10Z-TK schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like ISL95,
or try a keyword search, such as Digital Potentiometers
