Part Image

LT1013DS8#TRPBF - Analog Devices

Description: Dual Precision Op Amp

Download LT1013DS8#TRPBF Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
PCB Footprints
LT1013DS8#TRPBF - Analog Devices PCB footprint - Small Outline Packages - Small Outline Packages - S8-ren1
click to zoom
3D Models
LT1013DS8#TRPBF - Analog Devices  - 3D model - Small Outline Packages - S8-ren1
click to zoom

LT1013DS8#TRPBF Details

  • Manufacturer Part Number:

    LT1013DS8#TRPBF

  • Brand Name:

    Analog Devices Inc

  • Pbfree Code:

    No

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Package Description:

    0.150 INCH, LEAD FREE, PLASTIC, SOP-8

  • Pin Count:

    8

  • Manufacturer Package Code:

    05-08-1610 (S8)

  • Country Of Origin:

    Malaysia

  • ECCN Code:

    EAR99

  • HTS Code:

    8542.33.00.01

  • Manufacturer:

    Analog Devices Inc

  • YTEOL:

    9

  • Amplifier Type:

    OPERATIONAL AMPLIFIER

  • Architecture:

    VOLTAGE-FEEDBACK

  • Average Bias Current-Max (IIB):

    0.038 µA

  • Bias Current-Max (IIB) @25C:

    0.005 µA

  • Common-mode Reject Ratio-Min:

    97 dB

  • Common-mode Reject Ratio-Nom:

    113 dB

  • Frequency Compensation:

    YES

  • Input Offset Voltage-Max:

    400 µV

  • JESD-30 Code:

    R-PDSO-G8

  • JESD-609 Code:

    e3

  • Length:

    4.903 mm

  • Low-Bias:

    YES

  • Low-Offset:

    YES

  • Micropower:

    YES

  • Moisture Sensitivity Level:

    1

  • Neg Supply Voltage Limit-Max:

    -22 V

  • Neg Supply Voltage-Nom (Vsup):

    -15 V

  • Number of Functions:

    2

  • Number of Terminals:

    8

  • Operating Temperature-Max:

    70 °C

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    SOP

  • Package Equivalence Code:

    SOP8,.25

  • Package Shape:

    RECTANGULAR

  • Package Style:

    SMALL OUTLINE

  • Packing Method:

    TR

  • Peak Reflow Temperature (Cel):

    260

  • Power:

    NO

  • Programmable Power:

    NO

  • Qualification Status:

    Not Qualified

  • Seated Height-Max:

    1.752 mm

  • Slew Rate-Min:

    0.2 V/us

  • Slew Rate-Nom:

    0.4 V/us

  • Supply Current-Max:

    0.5 mA

  • Supply Voltage Limit-Max:

    22 V

  • Supply Voltage-Nom (Vsup):

    15 V

  • Surface Mount:

    YES

  • Technology:

    BIPOLAR

  • Temperature Grade:

    COMMERCIAL

  • Terminal Finish:

    Matte Tin (Sn) - annealed

  • Terminal Form:

    GULL WING

  • Terminal Pitch:

    1.27 mm

  • Terminal Position:

    DUAL

  • Time@Peak Reflow Temperature-Max (s):

    30

  • Voltage Gain-Min:

    500000

  • Wideband:

    NO

  • Width:

    3.895 mm

LT1013DS8#TRPBF Frequently Asked Questions (FAQs)

  • A good PCB layout for the LT1013DS8 involves keeping the input and output traces short and separate, using a solid ground plane, and placing the input and output capacitors close to the device. A 4-layer PCB with a dedicated ground plane is recommended.
  • To ensure stability, ensure that the output capacitor is within the recommended range (10uF to 100uF), the input capacitor is at least 10uF, and the output voltage is within the recommended range (1.2V to 15V). Also, avoid capacitive loads and ensure the device is properly decoupled.
  • The maximum power dissipation of the LT1013DS8 is 1.4W. However, this can be limited by the thermal resistance of the package and the ambient temperature. Ensure that the device is properly heat-sinked and the ambient temperature is within the recommended range (-40°C to 125°C).
  • The LT1013DS8 is rated for operation up to 125°C. However, the device's performance and reliability may degrade at high temperatures. Ensure that the device is properly heat-sinked and the ambient temperature is within the recommended range.
  • Use voltage clamps or transient voltage suppressors to protect the device from overvoltage conditions. For undervoltage protection, use a voltage supervisor or a power-on reset circuit to ensure the device is not powered on during brownout conditions.

Trust Checks

This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

LT1013DS8#TRPBF Overview

Use the download button to access the LT1013DS8#TRPBF schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like LT101, or try a keyword search, such as Operational Amplifiers

About Analog Devices

Analog Devices Inc. is a global leader in the design and manufacturing of analog, mixed-signal, and digital signal processing integrated circuits and software solutions for the industrial, automotive, healthcare, communications industries. Analog Devices serves a diverse range of markets including industrial, automotive, healthcare, energy, aerospace, defense, and consumer electronics industries. Analog Devices’ product portfolio includes a wide range of ICs, modules, and subsystems.

Parts related to LT1013DS8#TRPBF

Showing 0 results

LT1013DS8#TRPBF Alternates

Showing results

Image Part Number Model
Part Image FT1013DS8 Force Technologies Ltd

Operational Amplifier, 2 Func, 800uV Offset-Max, PDSO8

Part Image LT1013IS8 Linear Technology

Operational Amplifier, 2 Func, 400uV Offset-Max, BIPolar, PDSO8

Part Image LT1013DS8#TRPBF Linear Technology

Operational Amplifier, 2 Func, 400uV Offset-Max, BIPolar, PDSO8

Part Image LT1013DDE4 Texas Instruments

Operational Amplifier, 2 Func, 300uV Offset-Max, BIPolar, PDSO8

Part Image LT1013DCDR Texas Instruments

Operational Amplifier, 2 Func, 1000uV Offset-Max, BIPolar, PDSO8

For a full list of alternate parts for LT1013DS8#TRPBF, check out Findchips.com