Part Image

LT6011ACDD#PBF - Analog Devices

Description: LINEAR TECHNOLOGY - LT6011ACDD#PBF - Operational Amplifier, Rail-to-Rail O/P, 2 Amplifier, 350 kHz, 0.11 V/µs, 2.7V to 36V, DFN, 8 Pins

Download LT6011ACDD#PBF Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
PCB Footprints
LT6011ACDD#PBF - Analog Devices PCB footprint - Small Outline No-lead - Small Outline No-lead - 8-Lead (3mm × 3mm) Plastic DFN
click to zoom
3D Models
LT6011ACDD#PBF - Analog Devices  - 3D model - Small Outline No-lead - 8-Lead (3mm × 3mm) Plastic DFN
click to zoom

LT6011ACDD#PBF Details

  • Manufacturer Part Number:

    LT6011ACDD#PBF

  • Brand Name:

    Analog Devices Inc

  • Pbfree Code:

    No

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Package Description:

    3 X 3 MM, LEAD FREE, PLASTIC, MO-229WEED-1, DFN-8

  • Pin Count:

    8

  • Manufacturer Package Code:

    05-08-1698

  • Country Of Origin:

    Malaysia

  • ECCN Code:

    EAR99

  • HTS Code:

    8542.33.00.01

  • Manufacturer:

    Analog Devices Inc

  • YTEOL:

    10

  • Amplifier Type:

    OPERATIONAL AMPLIFIER

  • Architecture:

    VOLTAGE-FEEDBACK

  • Average Bias Current-Max (IIB):

    0.00045 µA

  • Bias Current-Max (IIB) @25C:

    0.0006 µA

  • Common-mode Reject Ratio-Min:

    109 dB

  • Common-mode Reject Ratio-Nom:

    135 dB

  • Frequency Compensation:

    YES

  • Input Offset Voltage-Max:

    210 µV

  • JESD-30 Code:

    S-PDSO-N8

  • JESD-609 Code:

    e3

  • Length:

    3 mm

  • Low-Bias:

    NO

  • Low-Offset:

    YES

  • Micropower:

    YES

  • Moisture Sensitivity Level:

    1

  • Neg Supply Voltage Limit-Max:

    -20 V

  • Neg Supply Voltage-Nom (Vsup):

    -15 V

  • Number of Functions:

    2

  • Number of Terminals:

    8

  • Operating Temperature-Max:

    70 °C

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    HVSON

  • Package Equivalence Code:

    SOLCC8,.12,20

  • Package Shape:

    SQUARE

  • Package Style:

    SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE

  • Peak Reflow Temperature (Cel):

    260

  • Power:

    NO

  • Programmable Power:

    NO

  • Qualification Status:

    Not Qualified

  • Seated Height-Max:

    0.8 mm

  • Slew Rate-Min:

    0.08 V/us

  • Slew Rate-Nom:

    0.11 V/us

  • Supply Current-Max:

    0.8 mA

  • Supply Voltage Limit-Max:

    20 V

  • Supply Voltage-Nom (Vsup):

    15 V

  • Surface Mount:

    YES

  • Technology:

    BIPOLAR

  • Temperature Grade:

    COMMERCIAL

  • Terminal Finish:

    Matte Tin (Sn) - annealed

  • Terminal Form:

    NO LEAD

  • Terminal Pitch:

    0.5 mm

  • Terminal Position:

    DUAL

  • Time@Peak Reflow Temperature-Max (s):

    30

  • Unity Gain BW-Nom:

    350

  • Voltage Gain-Min:

    600000

  • Wideband:

    NO

  • Width:

    3 mm

LT6011ACDD#PBF Frequently Asked Questions (FAQs)

  • A good PCB layout for the LT6011 involves keeping the input and output traces short and wide, using a solid ground plane, and placing the input and output capacitors close to the device. A 4-layer PCB with a dedicated ground plane is recommended.
  • To ensure stability in high-gain configurations, it's essential to follow the recommended compensation network and component values, and to ensure that the output capacitor is properly sized. Additionally, the input and output impedance should be matched to minimize ringing and oscillations.
  • The maximum power dissipation of the LT6011 is dependent on the package type and thermal resistance. For the DD package, the maximum power dissipation is approximately 1.4W. To calculate power dissipation, use the formula: Pd = (Vin - Vout) x Iout, where Vin is the input voltage, Vout is the output voltage, and Iout is the output current.
  • Yes, the LT6011 can be used as a voltage regulator, but it's essential to ensure that the output voltage is within the specified range (1.2V to 36V). The device is not designed for high-current applications, and the output current should be limited to 100mA or less. Additionally, the input voltage should be at least 2V higher than the output voltage.
  • To protect the LT6011 from input voltage transients and overvoltage conditions, use a voltage clamp or a transient voltage suppressor (TVS) diode at the input. Additionally, consider adding a fuse or a current-limiting resistor in series with the input to prevent damage from excessive current.

Trust Checks

This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

LT6011ACDD#PBF Overview

Use the download button to access the LT6011ACDD#PBF schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like LT601, or try a keyword search, such as Operational Amplifiers

About Analog Devices

Analog Devices Inc. is a global leader in the design and manufacturing of analog, mixed-signal, and digital signal processing integrated circuits and software solutions for the industrial, automotive, healthcare, communications industries. Analog Devices serves a diverse range of markets including industrial, automotive, healthcare, energy, aerospace, defense, and consumer electronics industries. Analog Devices’ product portfolio includes a wide range of ICs, modules, and subsystems.

Parts related to LT6011ACDD#PBF

Showing 0 results

LT6011ACDD#PBF Alternates

Showing results

Image Part Number Model
Part Image LT6011ACDD#TRPBF Analog Devices Inc

Operational Amplifier, 2 Func, 210uV Offset-Max, BIPolar, PDSO8

Part Image LT6011ACDD#PBF Linear Technology

Operational Amplifier, 2 Func, 210uV Offset-Max, BIPolar, PDSO8

Part Image LT6011ACDD Linear Technology

Operational Amplifier, 2 Func, 210uV Offset-Max, BIPolar, PDSO8

Part Image LT6011ACDD#TRPBF Linear Technology

Operational Amplifier, 2 Func, 210uV Offset-Max, BIPolar, PDSO8

Part Image LT6011ACDD#TR Linear Technology

Operational Amplifier, 2 Func, 210uV Offset-Max, BIPolar, PDSO8

For a full list of alternate parts for LT6011ACDD#PBF, check out Findchips.com