Please enter a minimum 3 letters or numbers
Technical Content
Part Image

LTC5800HWR-IPMA#PBF - Analog Devices

Description: SmartMesh IP Wireless 802.15.4e System-on-Chip

Download LTC5800HWR-IPMA#PBF Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
Send part feedback
Symbol
LTC5800HWR-IPMA#PBF - Analog Devices - PCB symbol
click to zoom
PCB Footprints
LTC5800HWR-IPMA#PBF - Analog Devices PCB footprint - Quad Flat No-Lead - Quad Flat No-Lead - WR Package 72-Lead QFN (10mm × 10mm) (Reference LTC DWG # 05-08-1930 Rev A)
click to zoom
3D Models
LTC5800HWR-IPMA#PBF - Analog Devices - 3D model - Quad Flat No-Lead - WR Package 72-Lead QFN (10mm × 10mm) (Reference LTC DWG # 05-08-1930 Rev A)
click to zoom

LTC5800HWR-IPMA#PBF Details

  • Manufacturer Part Number:

    LTC5800HWR-IPMA#PBF

  • Brand Name:

    Analog Devices Inc

  • Pbfree Code:

    No

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Package Description:

    10 X 10 MM, 0.85 MM HEIGHT, HALOGEN FREE AND ROHS COMPLIANT, PLASTIC, MO-220, QFN-72

  • Pin Count:

    72

  • Manufacturer Package Code:

    05-08-1930

  • ECCN Code:

    5A992.C

  • HTS Code:

    8542.31.00.01

  • Manufacturer:

    Analog Devices Inc

  • YTEOL:

    9

  • JESD-30 Code:

    S-PQCC-N72

  • JESD-609 Code:

    e3

  • Length:

    10 mm

  • Moisture Sensitivity Level:

    3

  • Number of Functions:

    1

  • Number of Terminals:

    72

  • Operating Temperature-Max:

    105 °C

  • Operating Temperature-Min:

    -55 °C

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    HVQCCN

  • Package Shape:

    SQUARE

  • Package Style:

    CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE

  • Seated Height-Max:

    1 mm

  • Supply Voltage-Nom:

    3.6 V

  • Surface Mount:

    YES

  • Technology:

    CMOS

  • Telecom IC Type:

    TELECOM CIRCUIT

  • Temperature Grade:

    OTHER

  • Terminal Finish:

    Matte Tin (Sn)

  • Terminal Form:

    NO LEAD

  • Terminal Pitch:

    0.5 mm

  • Terminal Position:

    QUAD

  • Width:

    10 mm

LTC5800HWR-IPMA#PBF Frequently Asked Questions (FAQs)

  • A 4-layer PCB with a solid ground plane and a separate power plane is recommended. Keep the analog and digital grounds separate and connect them at a single point. Use a low-ESR capacitor for the VCC pin and a 0.1uF capacitor for the AVCC pin.
  • Use a reliable communication protocol such as SPI or I2C, and ensure that the clock frequency is within the recommended range. Use a pull-up resistor on the SCL/SDA lines and a series resistor on the SCK line to prevent ringing.
  • The maximum cable length supported by the LTC5800HWR-IPMA is 100 meters for Category 5e cable and 80 meters for Category 6 cable, assuming a data rate of 100 Mbps.
  • Use a logic analyzer or oscilloscope to monitor the signals on the pins. Check the power supply voltage and ensure it is within the recommended range. Verify that the clock frequency is within the recommended range and that the communication protocol is correct.
  • The LTC5800HWR-IPMA is rated for operation up to 85°C. However, the device may not operate reliably above 70°C. Ensure that the device is properly heat-sinked and that the ambient temperature is within the recommended range.

Trust Checks

This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

LTC5800HWR-IPMA#PBF Overview

Use the download button to access the LTC5800HWR-IPMA#PBF schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like LTC58, or try a keyword search, such as Other Telecom ICs

About Analog Devices

Analog Devices Inc. is a global leader in the design and manufacturing of analog, mixed-signal, and digital signal processing integrated circuits and software solutions for the industrial, automotive, healthcare, communications industries. Analog Devices serves a diverse range of markets including industrial, automotive, healthcare, energy, aerospace, defense, and consumer electronics industries. Analog Devices’ product portfolio includes a wide range of ICs, modules, and subsystems.

Parts related to LTC5800HWR-IPMA#PBF

Showing 0 results

Part Image

← Prev Next →
About Us Contact Us Terms of Service Do not sell or share my personal information Privacy Policy Digital Services Act Library Loader

All content Copyright © 2020, Supplyframe.com. All rights reserved. Back to top ↑