Please enter a minimum 3 letters or numbers
Technical Content
Part Image

LTC6432AIUF-15#PBF - Analog Devices

Description: n 100kHz to 1400MHz Bandwidth n 54.4dBm OIP3 at 1MHz into a 100Ω Diff Load n 48.0dBm OIP3 at 150MHz into a 100Ω Diff Load n Up to 15dBm Output Power n NF = 3.0dB at 240MHz n Low 1/f Noise Corner n User Defined Low Frequency n 15.2dB Fixed Power Gain n A-Grade 100% OIP3 Tested at 150MHz n 0.8 nV/√Hz Total Input Noise n >2.75VP-P Linear Output Swing n P1dB = 22.5dBm n Insensitive to VCC Variation n Input/Output Internally Matched to 100Ω Differential n Single 5V Supply n DC Power = 850mW n Unc

Download LTC6432AIUF-15#PBF Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
Send part feedback
Symbol
LTC6432AIUF-15#PBF - Analog Devices - PCB symbol
click to zoom
PCB Footprints
LTC6432AIUF-15#PBF - Analog Devices PCB footprint - Quad Flat No-Lead - Quad Flat No-Lead - 24-Lead Plastic QFN (4mm × 4mm)*
click to zoom
3D Models
LTC6432AIUF-15#PBF - Analog Devices - 3D model - Quad Flat No-Lead - 24-Lead Plastic QFN (4mm × 4mm)*
click to zoom

LTC6432AIUF-15#PBF Details

  • Manufacturer Part Number:

    LTC6432AIUF-15#PBF

  • Brand Name:

    Analog Devices Inc

  • Pbfree Code:

    No

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Package Description:

    QFN-24

  • Pin Count:

    24

  • Manufacturer Package Code:

    05-08-1697

  • Country Of Origin:

    Malaysia

  • ECCN Code:

    EAR99

  • HTS Code:

    8542.39.00.01

  • Manufacturer:

    Analog Devices Inc

  • YTEOL:

    9

  • Analog IC - Other Type:

    ANALOG CIRCUIT

  • JESD-30 Code:

    R-PQCC-N24

  • JESD-609 Code:

    e3

  • Length:

    4 mm

  • Moisture Sensitivity Level:

    1

  • Number of Channels:

    1

  • Number of Functions:

    1

  • Number of Terminals:

    24

  • Operating Temperature-Max:

    85 °C

  • Operating Temperature-Min:

    -40 °C

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    HVQCCN

  • Package Equivalence Code:

    LCC24,.16SQ,20

  • Package Shape:

    SQUARE

  • Package Style:

    CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE

  • Peak Reflow Temperature (Cel):

    260

  • Seated Height-Max:

    0.8 mm

  • Supply Voltage-Max (Vsup):

    5.25 V

  • Supply Voltage-Min (Vsup):

    4.75 V

  • Supply Voltage-Nom (Vsup):

    5 V

  • Surface Mount:

    YES

  • Technology:

    CMOS

  • Temperature Grade:

    INDUSTRIAL

  • Terminal Finish:

    Matte Tin (Sn)

  • Terminal Form:

    NO LEAD

  • Terminal Pitch:

    0.5 mm

  • Terminal Position:

    QUAD

  • Time@Peak Reflow Temperature-Max (s):

    30

  • Width:

    4 mm

LTC6432AIUF-15#PBF Frequently Asked Questions (FAQs)

  • A good PCB layout for the LTC6432 involves keeping the input and output traces short and away from each other, using a solid ground plane, and placing the input and output capacitors close to the device. A 4-layer PCB with a dedicated ground plane is recommended.
  • To ensure stability, make sure to follow the recommended component values and PCB layout guidelines. Also, ensure that the input and output capacitors are of high quality and have low ESR. Additionally, the device should be decoupled with a 10uF capacitor between the VCC and GND pins.
  • The maximum power dissipation of the LTC6432 is dependent on the ambient temperature and the thermal resistance of the package. According to the datasheet, the maximum power dissipation is 1.4W at 25°C ambient temperature. However, this can be derated based on the actual operating conditions.
  • While the LTC6432 is optimized for 50ohm systems, it can be used in non-50ohm systems with some adjustments. The device's input and output impedance can be matched to the system impedance using external resistors and capacitors. However, this may require additional design and simulation efforts.
  • To troubleshoot issues with the LTC6432, start by verifying the power supply voltage and ensuring that it is within the recommended range. Check the input and output signals using an oscilloscope to identify any anomalies. Also, verify that the device is properly decoupled and that the PCB layout is correct. If the issue persists, consult the datasheet and application notes for further guidance.

Trust Checks

This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

LTC6432AIUF-15#PBF Overview

Use the download button to access the LTC6432AIUF-15#PBF schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like LTC64, or try a keyword search, such as Other Signal Circuits

About Analog Devices

Analog Devices Inc. is a global leader in the design and manufacturing of analog, mixed-signal, and digital signal processing integrated circuits and software solutions for the industrial, automotive, healthcare, communications industries. Analog Devices serves a diverse range of markets including industrial, automotive, healthcare, energy, aerospace, defense, and consumer electronics industries. Analog Devices’ product portfolio includes a wide range of ICs, modules, and subsystems.

Parts related to LTC6432AIUF-15#PBF

Showing 0 results

Part Image

← Prev Next →
About Us Contact Us Terms of Service Do not sell or share my personal information Privacy Policy Digital Services Act Library Loader Twitter LinkedIn

All content Copyright © 2020, Supplyframe.com. All rights reserved. Back to top ↑