ROHM recommends a thermal pad on the bottom of the package, connected to a large copper area on the PCB to dissipate heat efficiently. A minimum of 2oz copper thickness is recommended.
ROHM recommends following the derating curves in the datasheet for operation above 85°C. Additionally, ensure good thermal design, and consider using a heat sink or thermal interface material if necessary.
The maximum allowed voltage on the enable pin (EN) is 6V, which is the maximum rating for the logic input. Exceeding this voltage may damage the device.
Yes, the LTR18EZPF1201 can be used in switching regulator applications. However, ensure that the device is properly bypassed and decoupled to minimize noise and voltage spikes.
ROHM recommends following proper ESD handling procedures during assembly and storage. Additionally, consider adding external ESD protection devices, such as TVS diodes, to the PCB design.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
LTR18EZPF1201 Overview
Use the download button to access the LTR18EZPF1201 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like LTR18,
or try a keyword search, such as Fixed Resistors
