ROHM recommends a PCB layout with a thermal pad connected to a large copper area on the bottom layer, and multiple vias to dissipate heat efficiently. A minimum of 2oz copper thickness is recommended.
ROHM recommends following the derating guidelines in the datasheet, using a heat sink if necessary, and ensuring good airflow around the device. Additionally, consider using a thermally conductive interface material between the device and heat sink.
The maximum allowed voltage on the enable pin (EN) is 6V, which is higher than the recommended operating voltage of 5V. However, it's recommended to keep the EN voltage within the recommended operating range to ensure reliable operation.
Yes, the LTR18EZPF2001 can be used in a switching regulator application, but it's essential to ensure that the device is operated within its recommended frequency range (100 kHz to 1 MHz) and that the output voltage is properly filtered to minimize ripple and noise.
The power dissipation of the LTR18EZPF2001 can be calculated using the formula: Pd = (Vin - Vout) x Iout x Efficiency. The efficiency can be obtained from the datasheet or by measuring the device's power consumption under various operating conditions.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
LTR18EZPF2001 Overview
Use the download button to access the LTR18EZPF2001 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like LTR18,
or try a keyword search, such as Fixed Resistors
