A recommended PCB layout for optimal thermal performance would be to have a large copper area on the bottom layer connected to the thermal pad, and to use thermal vias to dissipate heat. A minimum of 2oz copper thickness is recommended.
To ensure the stability of the output voltage, it is recommended to use a capacitor with a low ESR (Equivalent Series Resistance) and a high ripple current rating. A 10uF to 22uF ceramic capacitor is recommended for the output capacitor.
The maximum input voltage that can be applied to the LTR18EZPF3900 is 40V. Exceeding this voltage may cause damage to the device.
To protect the device from overcurrent, it is recommended to add an external current limiting resistor or a fuse in series with the input voltage. The device also has a built-in overcurrent protection (OCP) feature that will limit the output current to a safe level in case of an overload.
A 1uF to 10uF ceramic capacitor is recommended for the input capacitor. The capacitor should be rated for the maximum input voltage and have a low ESR.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
LTR18EZPF3900 Overview
Use the download button to access the LTR18EZPF3900 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like LTR18,
or try a keyword search, such as Metal Glaze/Thick Film Resistors
