ROHM recommends a thermal pad on the bottom of the package, connected to a large copper area on the PCB to dissipate heat efficiently. A minimum of 2oz copper thickness is recommended.
ROHM recommends following the derating curves in the datasheet for operation above 85°C. Additionally, ensure good thermal design, and consider using a heat sink or thermal interface material if necessary.
The maximum allowed voltage on the enable pin is VCC + 0.3V, but it's recommended to keep it within VCC to prevent latch-up.
Yes, the LTR18EZPF4700 is suitable for battery-powered devices due to its low quiescent current (IQ) and low dropout voltage (VDO). However, consider the battery's voltage range and the regulator's input voltage requirements.
The output voltage tolerance is the sum of the initial tolerance, temperature tolerance, and line regulation tolerance. Refer to the datasheet for specific values and calculation methods.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
LTR18EZPF4700 Overview
Use the download button to access the LTR18EZPF4700 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like LTR18,
or try a keyword search, such as Fixed Resistors
