Please enter a minimum 3 letters or numbers
Technical Content
Part Image

MAX14808ETK+T - Analog Devices

Description: Switch ICs - Various Octal HV Digital Pulser + T/R Switch

Download MAX14808ETK+T Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
Send part feedback
Symbol
MAX14808ETK+T - Analog Devices - PCB symbol
click to zoom
PCB Footprints
MAX14808ETK+T - Analog Devices PCB footprint - Quad Flat No-Lead - Quad Flat No-Lead - MAX14808ETK+T
click to zoom
3D Models
MAX14808ETK+T - Analog Devices - 3D model - Quad Flat No-Lead - MAX14808ETK+T
click to zoom

MAX14808ETK+T Details

  • Manufacturer Part Number:

    MAX14808ETK+T

  • Brand Name:

    Analog Devices Inc

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Part Package Code:

    68-LFCSP-10X10X0.75

  • Package Description:

    10 X 10 MM, 0.75 MM HEIGHT, ROHS COMPLIANT, TQFN-68

  • Pin Count:

    68

  • Manufacturer Package Code:

    68-LFCSP-10X10X0.75

  • Country Of Origin:

    Japan, Mainland China, Malaysia, Philippines, Singapore, South Korea, Taiwan, Thailand, USA

  • HTS Code:

    8542.39.00.60

  • Date Of Intro:

    2012-10-02

  • Manufacturer:

    Analog Devices Inc

  • YTEOL:

    10

  • Analog IC - Other Type:

    SPST

  • JESD-30 Code:

    S-XQCC-N68

  • JESD-609 Code:

    e3

  • Length:

    10 mm

  • Moisture Sensitivity Level:

    3

  • Neg Supply Voltage-Max (Vsup):

    -5.1 V

  • Neg Supply Voltage-Min (Vsup):

    -4.9 V

  • Neg Supply Voltage-Nom (Vsup):

    -5 V

  • Number of Channels:

    1

  • Number of Functions:

    1

  • Number of Terminals:

    68

  • Operating Temperature-Max:

    85 °C

  • Operating Temperature-Min:

    -40 °C

  • Output:

    SEPARATE OUTPUT

  • Package Body Material:

    UNSPECIFIED

  • Package Code:

    HVQCCN

  • Package Equivalence Code:

    LCC68,.4SQ,20

  • Package Shape:

    SQUARE

  • Package Style:

    CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE

  • Peak Reflow Temperature (Cel):

    260

  • Seated Height-Max:

    0.8 mm

  • Supply Voltage-Max (Vsup):

    5.1 V

  • Supply Voltage-Min (Vsup):

    4.9 V

  • Supply Voltage-Nom (Vsup):

    5 V

  • Surface Mount:

    YES

  • Technology:

    BICMOS

  • Temperature Grade:

    INDUSTRIAL

  • Terminal Finish:

    Matte Tin (Sn) - annealed

  • Terminal Form:

    NO LEAD

  • Terminal Pitch:

    0.5 mm

  • Terminal Position:

    QUAD

  • Time@Peak Reflow Temperature-Max (s):

    30

  • Width:

    10 mm

MAX14808ETK+T Frequently Asked Questions (FAQs)

  • A good PCB layout for the MAX14808ETK+T involves keeping the analog and digital grounds separate, using a solid ground plane, and placing the device close to the power supply. Additionally, it's recommended to use a 4-layer PCB with a dedicated layer for the analog signals, and to minimize the length of the traces connecting the device to the power supply and other components.
  • The MAX14808ETK+T requires a single 3.3V or 5V power supply, and it's recommended to use a low-dropout linear regulator (LDO) to power the device. The power sequencing requirements are not critical, but it's recommended to power up the device after the power supply has stabilized. Additionally, it's recommended to add decoupling capacitors close to the device to filter out noise and ensure stable operation.
  • The MAX14808ETK+T is a high-speed RS-485 transceiver that can support data rates up to 50Mbps. However, the actual data rate achieved will depend on the specific application, cable length, and noise environment. In general, it's recommended to limit the data rate to 10Mbps or less for reliable operation over long cable lengths.
  • The MAX14808ETK+T can be configured for half-duplex or full-duplex operation by controlling the DE (driver enable) and RE (receiver enable) pins. For half-duplex operation, the DE pin is tied to the RE pin, and for full-duplex operation, the DE pin is tied to VCC and the RE pin is tied to GND. Additionally, the RO (receiver output) pin can be used to enable or disable the receiver.
  • The MAX14808ETK+T has built-in ESD protection on the RS-485 pins, which can withstand electrostatic discharges up to ±15kV. Additionally, the device has latch-up protection, which prevents the device from entering a latch-up state due to overvoltage or overcurrent conditions. This ensures that the device remains functional even in harsh environments.

Trust Checks

This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

MAX14808ETK+T Overview

Use the download button to access the MAX14808ETK+T schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like MAX14, or try a keyword search, such as Multiplexers or Switches

About Analog Devices

Analog Devices Inc. is a global leader in the design and manufacturing of analog, mixed-signal, and digital signal processing integrated circuits and software solutions for the industrial, automotive, healthcare, communications industries. Analog Devices serves a diverse range of markets including industrial, automotive, healthcare, energy, aerospace, defense, and consumer electronics industries. Analog Devices’ product portfolio includes a wide range of ICs, modules, and subsystems.

Parts related to MAX14808ETK+T

Showing 0 results

Part Image

← Prev Next →
About Us Contact Us Terms of Service Do not sell or share my personal information Privacy Policy Digital Services Act Library Loader Twitter LinkedIn

All content Copyright © 2020, Supplyframe.com. All rights reserved. Back to top ↑

MAX14808ETK+T Alternates

Showing results

Image Part Number Model
Part Image MAX14808ETK+T Maxim Integrated Products

SPST, 1 Func, 1 Channel, BICMOS, QCC68