Please enter a minimum 3 letters or numbers
Technical Content
Part Image

MAX187BCWE+T - Analog Devices

Description: 12-Bit Resolution S ±½ LSB Integral Nonlinearity (MAX187A/MAX189A) S Internal Track/Hold, 75kHz Sampling Rate S Single +5V Operation S Low Power: 2µA Shutdown Current 1.5mA Operating Current S Internal 4.096V Buffered Reference (MAX187) S 3-Wire Serial Interface, Compatible with SPI, QSPI, and MICROWIRE S Small-Footprint 8-Pin PDIP and 16-Pin SO

Download MAX187BCWE+T Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
Send part feedback
Symbol
MAX187BCWE+T - Analog Devices - PCB symbol
click to zoom
PCB Footprints
MAX187BCWE+T - Analog Devices PCB footprint - Small Outline Packages - Small Outline Packages - 16 Wide SO
click to zoom
3D Models
MAX187BCWE+T - Analog Devices - 3D model - Small Outline Packages - 16 Wide SO
click to zoom

MAX187BCWE+T Details

  • Manufacturer Part Number:

    MAX187BCWE+T

  • Brand Name:

    Analog Devices Inc

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Part Package Code:

    16-SOIC_W-300_MIL

  • Package Description:

    SOP, SOP16,.4

  • Pin Count:

    16

  • Manufacturer Package Code:

    16-SOIC_W-300_MIL

  • Reach Compliance Code:

    Compliant

  • Country Of Origin:

    Japan, Mainland China, Malaysia, Philippines, Singapore, South Korea, Taiwan, Thailand, USA

  • HTS Code:

    8542.39.00.30

  • Date Of Intro:

    1993-10-01

  • Manufacturer:

    Analog Devices Inc

  • YTEOL:

    9

  • Analog Input Voltage-Max:

    4.096 V

  • Conversion Time-Max:

    8.5 µs

  • Converter Type:

    ADC, SUCCESSIVE APPROXIMATION

  • JESD-30 Code:

    R-PDSO-G16

  • JESD-609 Code:

    e3

  • Length:

    10.3 mm

  • Linearity Error-Max (EL):

    0.0244%

  • Moisture Sensitivity Level:

    1

  • Number of Analog In Channels:

    1

  • Number of Bits:

    12

  • Number of Functions:

    1

  • Number of Terminals:

    16

  • Operating Temperature-Max:

    70 °C

  • Output Bit Code:

    BINARY

  • Output Format:

    SERIAL

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    SOP

  • Package Equivalence Code:

    SOP16,.4

  • Package Shape:

    RECTANGULAR

  • Package Style:

    SMALL OUTLINE

  • Peak Reflow Temperature (Cel):

    260

  • Qualification Status:

    Not Qualified

  • Sample Rate:

    0.075 MHz

  • Sample and Hold / Track and Hold:

    TRACK

  • Seated Height-Max:

    2.65 mm

  • Supply Current-Max:

    2.5 mA

  • Supply Voltage-Nom:

    5 V

  • Surface Mount:

    YES

  • Technology:

    CMOS

  • Temperature Grade:

    COMMERCIAL

  • Terminal Finish:

    Matte Tin (Sn) - annealed

  • Terminal Form:

    GULL WING

  • Terminal Pitch:

    1.27 mm

  • Terminal Position:

    DUAL

  • Time@Peak Reflow Temperature-Max (s):

    30

  • Width:

    7.5 mm

MAX187BCWE+T Frequently Asked Questions (FAQs)

  • The MAX187BCWE+T requires careful layout and placement to minimize noise and ensure optimal performance. It is recommended to place the device close to the power source, use a solid ground plane, and keep the input and output traces short and separate. Additionally, it is recommended to use a 10uF ceramic capacitor between the VIN and GND pins to filter out noise.
  • To ensure stability, it is recommended to follow the recommended layout and placement guidelines, use a sufficient output capacitor (at least 10uF), and ensure that the input voltage is within the recommended range. Additionally, it is recommended to add a small resistor (around 1kΩ) in series with the output capacitor to prevent oscillation.
  • The MAX187BCWE+T can handle input voltages up to 28V, but it is recommended to operate within the recommended input voltage range of 4.5V to 16V for optimal performance and reliability.
  • The MAX187BCWE+T is rated for operation up to 125°C, but it is recommended to derate the output current and input voltage at high temperatures to ensure reliability. It is also recommended to use a heat sink or thermal pad to dissipate heat.
  • To troubleshoot issues with the MAX187BCWE+T, it is recommended to check the input voltage, output current, and output voltage using an oscilloscope or multimeter. Check for noise, oscillation, or voltage droop, and ensure that the device is properly soldered and laid out. If the issue persists, it may be necessary to replace the device or consult with an Analog Devices support engineer.

Trust Checks

This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

MAX187BCWE+T Overview

Use the download button to access the MAX187BCWE+T schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like MAX18, or try a keyword search, such as Analog to Digital Converters

About Analog Devices

Analog Devices Inc. is a global leader in the design and manufacturing of analog, mixed-signal, and digital signal processing integrated circuits and software solutions for the industrial, automotive, healthcare, communications industries. Analog Devices serves a diverse range of markets including industrial, automotive, healthcare, energy, aerospace, defense, and consumer electronics industries. Analog Devices’ product portfolio includes a wide range of ICs, modules, and subsystems.

Parts related to MAX187BCWE+T

Showing 0 results

Part Image

← Prev Next →
About Us Contact Us Terms of Service Do not sell or share my personal information Privacy Policy Digital Services Act Library Loader Twitter LinkedIn

All content Copyright © 2020, Supplyframe.com. All rights reserved. Back to top ↑

MAX187BCWE+T Alternates

Showing results

Image Part Number Model
Part Image MAX187BEWE+ Analog Devices Inc

ADC, Successive Approximation, 12-Bit, 1 Func, 8 Channel, Serial Access, CMOS, PDIP20
Part Image MAX187BCWE+T Maxim Integrated Products

ADC, Successive Approximation, 12-Bit, 1 Func, 1 Channel, Serial Access, CMOS, PDSO16
Part Image MAX187BEWE+T Maxim Integrated Products

ADC, Successive Approximation, 12-Bit, 1 Func, 1 Channel, Serial Access, CMOS, PDSO16
Part Image MAX187BCWE Maxim Integrated Products

ADC, Successive Approximation, 12-Bit, 1 Func, 1 Channel, Serial Access, CMOS, PDSO16
Part Image MAX187BEWE Maxim Integrated Products

ADC, Successive Approximation, 12-Bit, 1 Func, 1 Channel, Serial Access, CMOS, PDSO16
For a full list of alternate parts for MAX187BCWE+T, check out Findchips.com