Japan, Mainland China, Malaysia, Philippines, Singapore, South Korea, Taiwan, Thailand, USA
ECCN Code:
EAR99
HTS Code:
8542.39.00.60
Date Of Intro:
1995-09-27
Manufacturer:
Analog Devices Inc
YTEOL:
9
Additional Feature:
TRISTATABLE RECEIVERS; EXTERNAL CHARGE PUMP
Differential Output:
NO
Driver Number of Bits:
4
High Level Input Current-Max:
0.0002 A
Input Characteristics:
SCHMITT TRIGGER
Interface IC Type:
LINE TRANSCEIVER
Interface Standard:
EIA-232-E; TIA-232-E; V.28
JESD-30 Code:
R-PDSO-G28
JESD-609 Code:
e3
Length:
17.9 mm
Moisture Sensitivity Level:
1
Number of Functions:
4
Number of Terminals:
28
Operating Temperature-Max:
85 °C
Operating Temperature-Min:
-40 °C
Out Swing-Min:
10 V
Output Characteristics:
3-STATE
Output Low Current-Max:
0.0016 A
Output Polarity:
INVERTED
Package Body Material:
PLASTIC/EPOXY
Package Code:
SOP
Package Equivalence Code:
SOP28,.4
Package Shape:
RECTANGULAR
Package Style:
SMALL OUTLINE
Peak Reflow Temperature (Cel):
260
Qualification Status:
Not Qualified
Receive Delay-Max:
10000 ns
Receiver Number of Bits:
5
Seated Height-Max:
2.65 mm
Supply Current-Max:
20 mA
Supply Voltage-Max:
5.5 V
Supply Voltage-Min:
4.5 V
Supply Voltage-Nom:
5 V
Supply Voltage1-Max:
5.5 V
Supply Voltage1-Min:
4.5 V
Supply Voltage1-Nom:
5 V
Surface Mount:
YES
Technology:
CMOS
Temperature Grade:
INDUSTRIAL
Terminal Finish:
Matte Tin (Sn) - annealed
Terminal Form:
GULL WING
Terminal Pitch:
1.27 mm
Terminal Position:
DUAL
Time@Peak Reflow Temperature-Max (s):
30
Width:
7.5 mm
MAX211EEWI+ Frequently Asked Questions (FAQs)
A good PCB layout for the MAX211EEWI+ involves keeping the analog and digital grounds separate, using a solid ground plane, and minimizing the length of the input traces. Additionally, it's recommended to use a 4-layer PCB with a dedicated power plane and a dedicated ground plane.
To ensure proper power and decoupling, use a high-quality power supply with low noise and ripple. Add decoupling capacitors (e.g., 10uF and 100nF) close to the device's power pins, and use a 10kΩ resistor in series with the power supply to prevent voltage spikes.
The MAX211EEWI+ can handle input signal amplitudes up to 2.5Vpp (peak-to-peak) without distortion or clipping. However, it's recommended to keep the input signal amplitude below 2Vpp to ensure optimal performance and prevent potential damage to the device.
To optimize noise performance, set the gain to the minimum required value, use a low-pass filter at the input, and ensure the device is operated within its recommended temperature range. Additionally, use a shielded enclosure and keep the device away from noise sources such as motors and switching power supplies.
The typical settling time of the MAX211EEWI+ is around 10μs to 20μs, depending on the gain setting and input signal frequency. However, this can vary depending on the specific application and operating conditions.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
MAX211EEWI+ Overview
Use the download button to access the MAX211EEWI+ schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like MAX21,
or try a keyword search, such as Line Driver or Receivers
About Analog Devices
Analog Devices Inc. is a global leader in the design and manufacturing of analog, mixed-signal, and digital signal processing integrated circuits and software solutions for the industrial, automotive, healthcare, communications industries. Analog Devices serves a diverse range of markets including industrial, automotive, healthcare, energy, aerospace, defense, and consumer electronics industries.
Analog Devices’ product portfolio includes a wide range of ICs, modules, and subsystems.