Japan, Mainland China, Malaysia, Philippines, Singapore, South Korea, Taiwan, Thailand, USA
ECCN Code:
EAR99
HTS Code:
8542.39.00.60
Date Of Intro:
1998-06-25
Manufacturer:
Analog Devices Inc
YTEOL:
9
Additional Feature:
EXTERNAL CHARGE PUMP
Differential Output:
NO
Driver Number of Bits:
2
High Level Input Current-Max:
0.00004 A
Input Characteristics:
SCHMITT TRIGGER
Interface IC Type:
LINE TRANSCEIVER
Interface Standard:
EIA-232-E; TIA-232-E; V.28; V.24
JESD-30 Code:
S-CQCC-N20
JESD-609 Code:
e0
Length:
8.89 mm
Moisture Sensitivity Level:
1
Number of Functions:
2
Number of Terminals:
20
Operating Temperature-Max:
125 °C
Operating Temperature-Min:
-55 °C
Out Swing-Min:
10 V
Output Characteristics:
TOTEM-POLE
Output Low Current-Max:
0.0032 A
Output Polarity:
INVERTED
Package Body Material:
CERAMIC, METAL-SEALED COFIRED
Package Code:
QCCN
Package Equivalence Code:
LCC20,.35SQ
Package Shape:
SQUARE
Package Style:
CHIP CARRIER
Peak Reflow Temperature (Cel):
240
Qualification Status:
Not Qualified
Receive Delay-Max:
1000 ns
Receiver Number of Bits:
2
Seated Height-Max:
2.54 mm
Supply Current-Max:
10 mA
Supply Voltage-Max:
5.5 V
Supply Voltage-Min:
4.5 V
Supply Voltage-Nom:
5 V
Surface Mount:
YES
Technology:
CMOS
Temperature Grade:
MILITARY
Terminal Finish:
Tin/Lead (Sn/Pb)
Terminal Form:
NO LEAD
Terminal Pitch:
1.27 mm
Terminal Position:
QUAD
Time@Peak Reflow Temperature-Max (s):
20
Transmit Delay-Max:
3500 ns
Width:
8.89 mm
MAX232AMLP Frequently Asked Questions (FAQs)
The MAX232AMLP can support data rates up to 120 kbps, but it's recommended to limit the data rate to 100 kbps for reliable operation.
The MAX232AMLP requires a single 5V power supply, and it's essential to decouple the power pins with 0.1uF and 10uF capacitors to ensure stable operation.
The null modem capacitor (C3) is used to block the DC voltage from the transmitter output and prevent it from being applied to the receiver input, ensuring proper operation in null modem configurations.
While the MAX232AMLP is specified for 5V operation, it can be used in 3.3V systems with some limitations. However, the output voltage swing will be reduced, and the device may not meet the RS-232 standard's requirements.
The SHDN pin should be connected to a logic high (VCC) to enable the device. If you want to shut down the device, connect SHDN to a logic low (GND). Note that the device will consume minimal power in shutdown mode.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
MAX232AMLP Overview
Use the download button to access the MAX232AMLP 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like MAX23,
or try a keyword search, such as Line Driver or Receivers
About Analog Devices
Analog Devices Inc. is a global leader in the design and manufacturing of analog, mixed-signal, and digital signal processing integrated circuits and software solutions for the industrial, automotive, healthcare, communications industries. Analog Devices serves a diverse range of markets including industrial, automotive, healthcare, energy, aerospace, defense, and consumer electronics industries.
Analog Devices’ product portfolio includes a wide range of ICs, modules, and subsystems.
