Please enter a minimum 3 letters or numbers
Technical Content
Part Image

MAX3045BESE+T - Analog Devices

Description: RS-422/RS-485 Interface IC 10kV ESD-Protected, Quad 5V RS-485/RS-422 Transmitters , 4.75V ~ 5.25V, -40°C ~ 85°C

Download MAX3045BESE+T Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
Send part feedback
Symbol
MAX3045BESE+T - Analog Devices - PCB symbol
click to zoom
PCB Footprints
MAX3045BESE+T - Analog Devices PCB footprint - Small Outline Packages - Small Outline Packages - 16 Narrow SO_2025-2
click to zoom
3D Models
MAX3045BESE+T - Analog Devices - 3D model - Small Outline Packages - 16 Narrow SO_2025-2
click to zoom

MAX3045BESE+T Details

  • Manufacturer Part Number:

    MAX3045BESE+T

  • Brand Name:

    Analog Devices Inc

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Part Package Code:

    16-SOIC_N-150_MIL

  • Package Description:

    SOP, SOP16,.25

  • Pin Count:

    16

  • Manufacturer Package Code:

    16-SOIC_N-150_MIL

  • Reach Compliance Code:

    Compliant

  • Country Of Origin:

    Japan, Mainland China, Malaysia, Philippines, Singapore, South Korea, Taiwan, Thailand, USA

  • ECCN Code:

    EAR99

  • HTS Code:

    8542.39.00.60

  • Date Of Intro:

    2001-07-15

  • Manufacturer:

    Analog Devices Inc

  • YTEOL:

    9

  • Differential Output:

    YES

  • Driver Number of Bits:

    4

  • Input Characteristics:

    STANDARD

  • Interface IC Type:

    LINE DRIVER

  • Interface Standard:

    EIA-422; EIA-485

  • JESD-30 Code:

    R-PDSO-G16

  • JESD-609 Code:

    e3

  • Length:

    9.9 mm

  • Moisture Sensitivity Level:

    1

  • Number of Functions:

    4

  • Number of Terminals:

    16

  • Operating Temperature-Max:

    85 °C

  • Operating Temperature-Min:

    -40 °C

  • Out Swing-Min:

    1.5 V

  • Output Characteristics:

    3-STATE

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    SOP

  • Package Equivalence Code:

    SOP16,.25

  • Package Shape:

    RECTANGULAR

  • Package Style:

    SMALL OUTLINE

  • Peak Reflow Temperature (Cel):

    260

  • Qualification Status:

    Not Qualified

  • Seated Height-Max:

    1.75 mm

  • Supply Voltage-Max:

    5.25 V

  • Supply Voltage-Min:

    4.75 V

  • Supply Voltage-Nom:

    5 V

  • Surface Mount:

    YES

  • Technology:

    CMOS

  • Temperature Grade:

    INDUSTRIAL

  • Terminal Finish:

    Matte Tin (Sn) - annealed

  • Terminal Form:

    GULL WING

  • Terminal Pitch:

    1.27 mm

  • Terminal Position:

    DUAL

  • Time@Peak Reflow Temperature-Max (s):

    30

  • Transmit Delay-Max:

    1500 ns

  • Width:

    3.9 mm

MAX3045BESE+T Frequently Asked Questions (FAQs)

  • A good PCB layout practice for the MAX3045BESE+T is to keep the analog and digital grounds separate, use a solid ground plane, and keep the input and output traces short and away from each other. Additionally, use a common-mode choke or ferrite bead on the input lines to filter out high-frequency noise.
  • To ensure proper power and decoupling, use a high-quality, low-ESR capacitor (e.g., 10uF ceramic) between the VCC and GND pins, and a smaller capacitor (e.g., 100nF ceramic) between the VCC and AVCC pins. Also, ensure that the power supply is clean and well-regulated, and that the device is operated within its recommended voltage range.
  • The MAX3045BESE+T can support data rates up to 100Mbps, but the actual data rate achievable depends on the specific application, PCB layout, and noise environment. In general, it's recommended to follow the datasheet's guidelines for transmission line impedance and termination to ensure reliable data transmission.
  • To troubleshoot issues with the MAX3045BESE+T, start by checking the power supply and decoupling, then verify that the device is properly configured and initialized. Use an oscilloscope to check the signal integrity and look for signs of noise or distortion. Also, review the datasheet and application notes for common pitfalls and troubleshooting guidelines.
  • Yes, the MAX3045BESE+T can be used in a hot-swap or hot-plug application, but it's essential to follow proper design guidelines to ensure reliable operation. This includes using a suitable power-up sequencing scheme, ensuring that the device is properly powered down before removal, and using a robust PCB design to withstand the mechanical stresses of hot-swapping.

Trust Checks

This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

MAX3045BESE+T Overview

Use the download button to access the MAX3045BESE+T schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like MAX30, or try a keyword search, such as Line Driver or Receivers

About Analog Devices

Analog Devices Inc. is a global leader in the design and manufacturing of analog, mixed-signal, and digital signal processing integrated circuits and software solutions for the industrial, automotive, healthcare, communications industries. Analog Devices serves a diverse range of markets including industrial, automotive, healthcare, energy, aerospace, defense, and consumer electronics industries. Analog Devices’ product portfolio includes a wide range of ICs, modules, and subsystems.

Parts related to MAX3045BESE+T

Showing 0 results

Part Image

← Prev Next →
About Us Contact Us Terms of Service Do not sell or share my personal information Privacy Policy Digital Services Act Library Loader Twitter LinkedIn

All content Copyright © 2020, Supplyframe.com. All rights reserved. Back to top ↑

MAX3045BESE+T Alternates

Showing results

Image Part Number Model
Part Image MAX3045BCWE Rochester Electronics LLC

QUAD LINE DRIVER, PDSO16, SO-16
Part Image MAX3045BCWE+T Analog Devices Inc

Line Driver, 4 Func, 4 Driver, CMOS, PDSO16
Part Image MAX3045BESE+T Maxim Integrated Products

Line Driver, 4 Func, 4 Driver, CMOS, PDSO16, 0.300 INCH, SOIC-16
Part Image MAX3045BCWE Maxim Integrated Products

Line Driver, 4 Func, 4 Driver, CMOS, PDSO16
Part Image MAX3045BCWE-T Maxim Integrated Products

Line Driver, 4 Func, 4 Driver, CMOS, PDSO16
For a full list of alternate parts for MAX3045BESE+T, check out Findchips.com