Part Image

MAX333EWP+ - Analog Devices

Description: MAXIM INTEGRATED PRODUCTS - MAX333EWP+ - Analogue Switch, CMOS, 4 Channels, SPDT, 350 ohm, 10V to 30V, ± 5V to ± 18V, WSOIC, 20 Pins

Download MAX333EWP+ Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
PCB Footprints
MAX333EWP+ - Analog Devices PCB footprint - Small Outline Packages - Small Outline Packages - W20-2
click to zoom
3D Models
MAX333EWP+ - Analog Devices  - 3D model - Small Outline Packages - W20-2
click to zoom

MAX333EWP+ Details

  • Manufacturer Part Number:

    MAX333EWP+

  • Brand Name:

    Analog Devices Inc

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Part Package Code:

    20-SOIC_W-300_MIL

  • Package Description:

    SO-20

  • Pin Count:

    20

  • Manufacturer Package Code:

    20-SOIC_W-300_MIL

  • Country Of Origin:

    Japan, Mainland China, Malaysia, Philippines, Singapore, South Korea, Taiwan, Thailand, USA

  • HTS Code:

    8542.39.00.60

  • Date Of Intro:

    1988-02-01

  • Manufacturer:

    Analog Devices Inc

  • YTEOL:

    9

  • Analog IC - Other Type:

    SPDT

  • JESD-30 Code:

    R-PDSO-G20

  • JESD-609 Code:

    e3

  • Length:

    12.8 mm

  • Moisture Sensitivity Level:

    1

  • Neg Supply Voltage-Max (Vsup):

    -18 V

  • Neg Supply Voltage-Min (Vsup):

    -5 V

  • Neg Supply Voltage-Nom (Vsup):

    -15 V

  • Number of Channels:

    1

  • Number of Functions:

    4

  • Number of Terminals:

    20

  • Off-state Isolation-Nom:

    72 dB

  • On-state Resistance-Max (Ron):

    175 Ω

  • Operating Temperature-Max:

    85 °C

  • Operating Temperature-Min:

    -40 °C

  • Output:

    SEPARATE OUTPUT

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    SOP

  • Package Equivalence Code:

    SOP20,.4

  • Package Shape:

    RECTANGULAR

  • Package Style:

    SMALL OUTLINE

  • Peak Reflow Temperature (Cel):

    260

  • Qualification Status:

    Not Qualified

  • Seated Height-Max:

    2.65 mm

  • Signal Current-Max:

    0.02 A

  • Supply Current-Max (Isup):

    0.25 mA

  • Supply Voltage-Max (Vsup):

    18 V

  • Supply Voltage-Min (Vsup):

    5 V

  • Supply Voltage-Nom (Vsup):

    15 V

  • Surface Mount:

    YES

  • Switch-off Time-Max:

    500 ns

  • Switch-on Time-Max:

    1000 ns

  • Switching:

    BREAK-BEFORE-MAKE

  • Technology:

    CMOS

  • Temperature Grade:

    INDUSTRIAL

  • Terminal Finish:

    Matte Tin (Sn) - annealed

  • Terminal Form:

    GULL WING

  • Terminal Pitch:

    1.27 mm

  • Terminal Position:

    DUAL

  • Time@Peak Reflow Temperature-Max (s):

    30

  • Width:

    7.5 mm

MAX333EWP+ Frequently Asked Questions (FAQs)

  • A good layout and routing practice for the MAX333EWP+ is to keep the input and output traces short and away from each other, use a solid ground plane, and avoid running digital and analog traces parallel to each other. Additionally, it's recommended to use a common-mode choke or ferrite bead to filter out high-frequency noise.
  • To ensure proper power and decoupling, connect the VCC pin to a clean, low-noise power supply, and decouple the VCC pin with a 0.1uF ceramic capacitor to GND. Additionally, it's recommended to use a 10uF electrolytic capacitor in parallel with the 0.1uF capacitor to filter out low-frequency noise.
  • The MAX333EWP+ can support data rates up to 100Mbps, making it suitable for high-speed applications such as USB, Ethernet, and video interfaces.
  • The MAX333EWP+ can be configured for half-duplex or full-duplex operation by connecting the DIR pin to a logic high or low, respectively. In half-duplex mode, the transmitter and receiver are enabled alternately, while in full-duplex mode, both the transmitter and receiver are enabled simultaneously.
  • The typical power consumption of the MAX333EWP+ is around 15mA, making it suitable for low-power applications. However, the actual power consumption may vary depending on the operating frequency, data rate, and output load.

Trust Checks

This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

MAX333EWP+ Overview

Use the download button to access the MAX333EWP+ schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like MAX33, or try a keyword search, such as Multiplexers or Switches

About Analog Devices

Analog Devices Inc. is a global leader in the design and manufacturing of analog, mixed-signal, and digital signal processing integrated circuits and software solutions for the industrial, automotive, healthcare, communications industries. Analog Devices serves a diverse range of markets including industrial, automotive, healthcare, energy, aerospace, defense, and consumer electronics industries. Analog Devices’ product portfolio includes a wide range of ICs, modules, and subsystems.

Parts related to MAX333EWP+

Showing 0 results

MAX333EWP+ Alternates

Showing results

Image Part Number Model
Part Image MAX333CWP+T Maxim Integrated Products

SPDT, 4 Func, 1 Channel, CMOS, PDSO20

Part Image MAX333EWP+T Maxim Integrated Products

SPDT, 4 Func, 1 Channel, CMOS, PDSO20

Part Image MAX333EWP-T Maxim Integrated Products

SPDT, 4 Func, 1 Channel, CMOS, PDSO20

Part Image MAX333EWP Maxim Integrated Products

SPDT, 4 Func, 1 Channel, CMOS, PDSO20

Part Image MAX333EWP-TR Maxim Integrated Products

Multiplexers/Switches, 4 Func, CMOS, PDSO20

For a full list of alternate parts for MAX333EWP+, check out Findchips.com