Part Image

MAX4508ESE+ - Analog Devices

Description: MAXIM INTEGRATED PRODUCTS - MAX4508ESE+ - 8:1 Analog Multiplexer IC, Single, 950 ohm, 9V to 36V, NSOIC-16

Download MAX4508ESE+ Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
PCB Footprints
MAX4508ESE+ - Analog Devices PCB footprint - Small Outline Packages - Small Outline Packages - 16 Narrow SO
click to zoom
3D Models
MAX4508ESE+ - Analog Devices  - 3D model - Small Outline Packages - 16 Narrow SO
click to zoom

MAX4508ESE+ Details

  • Manufacturer Part Number:

    MAX4508ESE+

  • Brand Name:

    Analog Devices Inc

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Part Package Code:

    16-SOIC_N-150_MIL

  • Package Description:

    0.150 INCH, ROHS COMPLIANT, MS-012AC, SOIC-16

  • Pin Count:

    16

  • Manufacturer Package Code:

    16-SOIC_N-150_MIL

  • Country Of Origin:

    Japan, Mainland China, Malaysia, Philippines, Singapore, South Korea, Taiwan, Thailand, USA

  • HTS Code:

    8542.39.00.60

  • Date Of Intro:

    1999-01-03

  • Manufacturer:

    Analog Devices Inc

  • YTEOL:

    9

  • Additional Feature:

    FAULT PROTECTED

  • Analog IC - Other Type:

    SINGLE-ENDED MULTIPLEXER

  • JESD-30 Code:

    R-PDSO-G16

  • JESD-609 Code:

    e3

  • Length:

    9.9 mm

  • Moisture Sensitivity Level:

    1

  • Neg Supply Voltage-Max (Vsup):

    -20 V

  • Neg Supply Voltage-Min (Vsup):

    -4.5 V

  • Neg Supply Voltage-Nom (Vsup):

    -15 V

  • Normal Position:

    NO

  • Number of Channels:

    8

  • Number of Functions:

    1

  • Number of Terminals:

    16

  • Off-state Isolation-Nom:

    70 dB

  • On-state Resistance Match-Nom:

    15 Ω

  • On-state Resistance-Max (Ron):

    400 Ω

  • Operating Temperature-Max:

    85 °C

  • Operating Temperature-Min:

    -40 °C

  • Output:

    COMMON OUTPUT

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    SOP

  • Package Equivalence Code:

    SOP16,.25

  • Package Shape:

    RECTANGULAR

  • Package Style:

    SMALL OUTLINE

  • Peak Reflow Temperature (Cel):

    260

  • Qualification Status:

    Not Qualified

  • Seated Height-Max:

    1.75 mm

  • Signal Current-Max:

    0.03 A

  • Supply Current-Max (Isup):

    0.6 mA

  • Supply Voltage-Max (Vsup):

    20 V

  • Supply Voltage-Min (Vsup):

    4.5 V

  • Supply Voltage-Nom (Vsup):

    15 V

  • Surface Mount:

    YES

  • Switch-off Time-Max:

    200 ns

  • Switch-on Time-Max:

    275 ns

  • Switching:

    BREAK-BEFORE-MAKE

  • Technology:

    CMOS

  • Temperature Grade:

    INDUSTRIAL

  • Terminal Finish:

    Matte Tin (Sn)

  • Terminal Form:

    GULL WING

  • Terminal Pitch:

    1.27 mm

  • Terminal Position:

    DUAL

  • Time@Peak Reflow Temperature-Max (s):

    30

  • Width:

    3.9 mm

MAX4508ESE+ Frequently Asked Questions (FAQs)

  • The recommended layout and placement for the MAX4508ESE+ involves keeping the input and output traces as short as possible, using a solid ground plane, and placing the device close to the power supply. Additionally, it's recommended to use a 4-layer PCB with a dedicated power plane and a dedicated ground plane to minimize noise and EMI.
  • To ensure the MAX4508ESE+ is properly powered and decoupled, use a high-quality power supply with low noise and ripple, and decouple the device with a 0.1uF ceramic capacitor between VCC and GND, and a 10uF electrolytic capacitor between VCC and GND. Additionally, use a 1uF ceramic capacitor between the input pins and GND to filter out high-frequency noise.
  • The maximum operating temperature range for the MAX4508ESE+ is -40°C to +125°C. However, it's recommended to operate the device within the -20°C to +85°C range for optimal performance and reliability.
  • To troubleshoot issues with the MAX4508ESE+, start by checking the power supply and decoupling, then verify the input and output signals using an oscilloscope. Check for noise, distortion, and oscillations, and ensure the device is properly grounded. If issues persist, consult the datasheet and application notes, or contact Analog Devices Inc. support for further assistance.
  • The MAX4508ESE+ is a high-reliability device, but it's essential to follow proper design and manufacturing guidelines to ensure the device meets the required safety and reliability standards. Consult the datasheet and application notes, and contact Analog Devices Inc. support for further guidance on using the MAX4508ESE+ in high-reliability or safety-critical applications.

Trust Checks

This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

MAX4508ESE+ Overview

Use the download button to access the MAX4508ESE+ schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like MAX45, or try a keyword search, such as Multiplexers or Switches

About Analog Devices

Analog Devices Inc. is a global leader in the design and manufacturing of analog, mixed-signal, and digital signal processing integrated circuits and software solutions for the industrial, automotive, healthcare, communications industries. Analog Devices serves a diverse range of markets including industrial, automotive, healthcare, energy, aerospace, defense, and consumer electronics industries. Analog Devices’ product portfolio includes a wide range of ICs, modules, and subsystems.

Parts related to MAX4508ESE+

Showing 0 results

MAX4508ESE+ Alternates

Showing results

Image Part Number Model
Part Image MAX4508CSE+ Maxim Integrated Products

Single-Ended Multiplexer, 1 Func, 8 Channel, CMOS, PDSO16

Part Image MAX4508CSE+ Analog Devices Inc

Single-Ended Multiplexer, 1 Func, 8 Channel, CMOS, PDSO16

Part Image MAX4508ESE+ Maxim Integrated Products

Single-Ended Multiplexer, 1 Func, 8 Channel, CMOS, PDSO16

Part Image MAX4508CSE Maxim Integrated Products

Single-Ended Multiplexer, 1 Func, 8 Channel, CMOS, PDSO16