Part Image

MAX4666ESE+ - Analog Devices

Description: Maxim MAX4666ESE+, Analogue Switch Quad SPST, 4.5 → 36 V, 16-Pin SOIC

Download MAX4666ESE+ Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
PCB Footprints
MAX4666ESE+ - Analog Devices PCB footprint - Small Outline Packages - Small Outline Packages - 16 Narrow SO
click to zoom
3D Models
MAX4666ESE+ - Analog Devices  - 3D model - Small Outline Packages - 16 Narrow SO
click to zoom

MAX4666ESE+ Details

  • Manufacturer Part Number:

    MAX4666ESE+

  • Brand Name:

    Analog Devices Inc

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Part Package Code:

    16-SOIC_N-150_MIL

  • Package Description:

    0.150 INCH, SOIC-16

  • Pin Count:

    16

  • Manufacturer Package Code:

    16-SOIC_N-150_MIL

  • Country Of Origin:

    Japan, Mainland China, Malaysia, Philippines, Singapore, South Korea, Taiwan, Thailand, USA

  • HTS Code:

    8542.39.00.60

  • Date Of Intro:

    1999-07-01

  • Manufacturer:

    Analog Devices Inc

  • YTEOL:

    9

  • Analog IC - Other Type:

    SPST

  • JESD-30 Code:

    R-PDSO-G16

  • JESD-609 Code:

    e3

  • Length:

    9.9 mm

  • Moisture Sensitivity Level:

    1

  • Neg Supply Voltage-Max (Vsup):

    -20 V

  • Neg Supply Voltage-Min (Vsup):

    -4.5 V

  • Neg Supply Voltage-Nom (Vsup):

    -15 V

  • Normal Position:

    NO/NC

  • Number of Channels:

    1

  • Number of Functions:

    4

  • Number of Terminals:

    16

  • Off-state Isolation-Nom:

    62 dB

  • On-state Resistance Match-Nom:

    0.2 Ω

  • On-state Resistance-Max (Ron):

    4 Ω

  • Operating Temperature-Max:

    85 °C

  • Operating Temperature-Min:

    -40 °C

  • Output:

    SEPARATE OUTPUT

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    SOP

  • Package Equivalence Code:

    SOP16,.25

  • Package Shape:

    RECTANGULAR

  • Package Style:

    SMALL OUTLINE

  • Peak Reflow Temperature (Cel):

    260

  • Qualification Status:

    Not Qualified

  • Seated Height-Max:

    1.75 mm

  • Signal Current-Max:

    0.1 A

  • Supply Current-Max (Isup):

    0.005 mA

  • Supply Voltage-Max (Vsup):

    20 V

  • Supply Voltage-Min (Vsup):

    4.5 V

  • Supply Voltage-Nom (Vsup):

    15 V

  • Surface Mount:

    YES

  • Switch-off Time-Max:

    175 ns

  • Switch-on Time-Max:

    275 ns

  • Switching:

    BREAK-BEFORE-MAKE

  • Technology:

    CMOS

  • Temperature Grade:

    INDUSTRIAL

  • Terminal Finish:

    Matte Tin (Sn) - annealed

  • Terminal Form:

    GULL WING

  • Terminal Pitch:

    1.27 mm

  • Terminal Position:

    DUAL

  • Time@Peak Reflow Temperature-Max (s):

    30

  • Width:

    3.9 mm

MAX4666ESE+ Frequently Asked Questions (FAQs)

  • A good PCB layout practice for the MAX4666ESE+ is to keep the analog and digital grounds separate, use a solid ground plane, and keep the input and output traces short and away from each other. Additionally, use a common-mode choke or ferrite bead to filter out high-frequency noise on the input lines.
  • The MAX4666ESE+ requires a stable power supply with a minimum of 4.5V and a maximum of 5.5V. Use a high-quality decoupling capacitor (e.g., 0.1uF ceramic capacitor) as close to the device as possible to filter out power supply noise. Additionally, use a separate analog and digital power supply if possible.
  • The MAX4666ESE+ can support data rates up to 100Mbps, but the actual data rate may be limited by the system's noise margin, PCB layout, and other factors. It's recommended to consult the datasheet and perform simulations to determine the maximum achievable data rate for a specific application.
  • To troubleshoot issues with the MAX4666ESE+, start by checking the power supply and decoupling, then verify the input and output connections. Use an oscilloscope to check the signal integrity and look for signs of noise or distortion. Consult the datasheet and application notes for specific troubleshooting guidelines.
  • Yes, the MAX4666ESE+ can be used in a hot-swap or hot-plug application, but it's essential to ensure that the device is properly powered down before the hot-swap event to prevent damage. Consult the datasheet and application notes for specific guidelines on hot-swap and hot-plug operation.

Trust Checks

This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

MAX4666ESE+ Overview

Use the download button to access the MAX4666ESE+ schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like MAX46, or try a keyword search, such as Multiplexers or Switches

About Analog Devices

Analog Devices Inc. is a global leader in the design and manufacturing of analog, mixed-signal, and digital signal processing integrated circuits and software solutions for the industrial, automotive, healthcare, communications industries. Analog Devices serves a diverse range of markets including industrial, automotive, healthcare, energy, aerospace, defense, and consumer electronics industries. Analog Devices’ product portfolio includes a wide range of ICs, modules, and subsystems.

Parts related to MAX4666ESE+

Showing 0 results

MAX4666ESE+ Alternates

Showing results

Image Part Number Model
Part Image MAX4666ESE+T Analog Devices Inc

SPST, 4 Func, 1 Channel, CMOS, PDSO16

Part Image MAX4666CSE+ Maxim Integrated Products

SPST, 4 Func, 1 Channel, CMOS, PDSO16

Part Image MAX4666ESE Maxim Integrated Products

SPST, 4 Func, 1 Channel, CMOS, PDSO16

Part Image MAX4666ESE-T Maxim Integrated Products

SPST, 4 Func, 1 Channel, CMOS, PDSO16

Part Image MAX4666CSE-T Maxim Integrated Products

SPST, 4 Func, 1 Channel, CMOS, PDSO16

For a full list of alternate parts for MAX4666ESE+, check out Findchips.com