Please enter a minimum 3 letters or numbers
Technical Content
Part Image

MAX488ECSA+ - Analog Devices

Description: MAX488ECSA+, Line Transceiver, RS-485, RS-422 Differential, 5 V, 8-Pin SOIC

Download MAX488ECSA+ Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
Send part feedback
Symbol
MAX488ECSA+ - Analog Devices - PCB symbol
click to zoom
PCB Footprints
MAX488ECSA+ - Analog Devices PCB footprint - Small Outline Packages - Small Outline Packages - 8 SO-3
click to zoom
3D Models
MAX488ECSA+ - Analog Devices - 3D model - Small Outline Packages - 8 SO-3
click to zoom

MAX488ECSA+ Details

  • Manufacturer Part Number:

    MAX488ECSA+

  • Brand Name:

    Analog Devices Inc

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Part Package Code:

    8-SOIC_N-150_MIL

  • Package Description:

    0.150 INCH, LEAD FREE, MS-012A, SOIC-8

  • Pin Count:

    8

  • Manufacturer Package Code:

    8-SOIC_N-150_MIL

  • Country Of Origin:

    Japan, Mainland China, Malaysia, Philippines, Singapore, South Korea, Taiwan, Thailand, USA

  • ECCN Code:

    EAR99

  • HTS Code:

    8542.39.00.60

  • Date Of Intro:

    1995-09-23

  • Manufacturer:

    Analog Devices Inc

  • YTEOL:

    9

  • Differential Output:

    YES

  • Driver Number of Bits:

    1

  • High Level Input Current-Max:

    0.000002 A

  • Input Characteristics:

    DIFFERENTIAL SCHMITT TRIGGER

  • Interface IC Type:

    LINE TRANSCEIVER

  • Interface Standard:

    EIA-422; EIA-485

  • JESD-30 Code:

    R-PDSO-G8

  • JESD-609 Code:

    e3

  • Length:

    4.9 mm

  • Moisture Sensitivity Level:

    1

  • Number of Functions:

    1

  • Number of Terminals:

    8

  • Operating Temperature-Max:

    70 °C

  • Out Swing-Min:

    1.5 V

  • Output Characteristics:

    TOTEM-POLE

  • Output Low Current-Max:

    0.004 A

  • Output Polarity:

    COMPLEMENTARY

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    SOP

  • Package Equivalence Code:

    SOP8,.25

  • Package Shape:

    RECTANGULAR

  • Package Style:

    SMALL OUTLINE

  • Peak Reflow Temperature (Cel):

    260

  • Qualification Status:

    Not Qualified

  • Receive Delay-Max:

    2000 ns

  • Receiver Number of Bits:

    1

  • Seated Height-Max:

    1.75 mm

  • Supply Current-Max:

    0.25 mA

  • Supply Voltage-Max:

    5.25 V

  • Supply Voltage-Min:

    4.75 V

  • Supply Voltage-Nom:

    5 V

  • Supply Voltage1-Max:

    5.25 V

  • Supply Voltage1-Min:

    4.75 V

  • Supply Voltage1-Nom:

    5 V

  • Surface Mount:

    YES

  • Technology:

    CMOS

  • Temperature Grade:

    COMMERCIAL

  • Terminal Finish:

    Matte Tin (Sn) - annealed

  • Terminal Form:

    GULL WING

  • Terminal Pitch:

    1.27 mm

  • Terminal Position:

    DUAL

  • Time@Peak Reflow Temperature-Max (s):

    30

  • Transmit Delay-Max:

    2000 ns

  • Width:

    3.9 mm

MAX488ECSA+ Frequently Asked Questions (FAQs)

  • A good PCB layout for the MAX488ECSA+ involves keeping the analog and digital grounds separate, using a solid ground plane, and minimizing the length of the traces between the device and the signal sources. Additionally, it's recommended to use a 4-layer PCB with a dedicated power plane and a dedicated ground plane.
  • The MAX488ECSA+ requires a single 5V power supply, and it's recommended to use a low-dropout linear regulator (LDO) to power the device. The power sequencing requirements are not critical, but it's recommended to power up the device after the power supply has stabilized.
  • The MAX488ECSA+ can achieve a maximum data rate of 100Mbps, but the actual data rate may be limited by the signal quality, cable length, and the quality of the transmitter and receiver. Additionally, the device has a limited bandwidth of 30MHz, which may also affect the maximum data rate.
  • To troubleshoot common issues with the MAX488ECSA+, it's recommended to use an oscilloscope to check the signal quality, verify the signal levels and timing, and check for any signs of signal distortion or noise. Additionally, it's recommended to check the device's power supply, ground connections, and signal routing to ensure they are correct and not causing any issues.
  • Yes, the MAX488ECSA+ is a high-speed device and can be susceptible to electromagnetic interference (EMI). To minimize EMI, it's recommended to use a shielded cable, keep the signal traces short and away from noise sources, and use a common-mode choke or ferrite bead to filter out high-frequency noise.

Trust Checks

This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

MAX488ECSA+ Overview

Use the download button to access the MAX488ECSA+ schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like MAX48, or try a keyword search, such as Line Driver or Receivers

About Analog Devices

Analog Devices Inc. is a global leader in the design and manufacturing of analog, mixed-signal, and digital signal processing integrated circuits and software solutions for the industrial, automotive, healthcare, communications industries. Analog Devices serves a diverse range of markets including industrial, automotive, healthcare, energy, aerospace, defense, and consumer electronics industries. Analog Devices’ product portfolio includes a wide range of ICs, modules, and subsystems.

Parts related to MAX488ECSA+

Showing 0 results

Part Image

← Prev Next →
About Us Contact Us Terms of Service Do not sell or share my personal information Privacy Policy Digital Services Act Library Loader Twitter LinkedIn

All content Copyright © 2020, Supplyframe.com. All rights reserved. Back to top ↑

MAX488ECSA+ Alternates

Showing results

Image Part Number Model
Part Image MAX488CSA+ Analog Devices Inc

Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, CMOS, PDSO8
Part Image MAX488CSA+T Analog Devices Inc

Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, CMOS, PDSO8
Part Image MAX488ECSA+ Maxim Integrated Products

Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, CMOS, PDSO8
Part Image MAX488CSA Maxim Integrated Products

Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, CMOS, PDSO8
Part Image MAX488EESA Maxim Integrated Products

Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, CMOS, PDSO8
For a full list of alternate parts for MAX488ECSA+, check out Findchips.com