Please enter a minimum 3 letters or numbers
Technical Content
Part Image

MAX5883EGM+D - Analog Devices

Description: 3.3V, 12-Bit, 200Msps High Dynamic Performance DAC with CMOS Inputs

Download MAX5883EGM+D Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
Send part feedback
Symbol
MAX5883EGM+D - Analog Devices - PCB symbol
click to zoom
PCB Footprints
MAX5883EGM+D - Analog Devices PCB footprint - Quad Flat No-Lead - Quad Flat No-Lead - G4877-1
click to zoom
3D Models
MAX5883EGM+D - Analog Devices - 3D model - Quad Flat No-Lead - G4877-1
click to zoom

MAX5883EGM+D Details

  • Manufacturer Part Number:

    MAX5883EGM+D

  • Brand Name:

    Analog Devices Inc

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Part Package Code:

    48-LFCSP-7X7X0.85

  • Package Description:

    HVQCCN,

  • Pin Count:

    48

  • Manufacturer Package Code:

    48-LFCSP-7X7X0.85

  • Reach Compliance Code:

    Compliant

  • Country Of Origin:

    Japan, Mainland China, Malaysia, Philippines, Singapore, South Korea, Taiwan, Thailand, USA

  • HTS Code:

    8542.39.00.40

  • Date Of Intro:

    2003-05-14

  • Manufacturer:

    Analog Devices Inc

  • YTEOL:

    8.5

  • Analog Output Voltage-Max:

    1.1 V

  • Analog Output Voltage-Min:

    -0.5 V

  • Converter Type:

    D/A CONVERTER

  • Input Bit Code:

    BINARY

  • Input Format:

    PARALLEL, WORD

  • JESD-30 Code:

    S-XQCC-N48

  • JESD-609 Code:

    e3

  • Length:

    7 mm

  • Moisture Sensitivity Level:

    3

  • Number of Bits:

    12

  • Number of Functions:

    1

  • Number of Terminals:

    48

  • Operating Temperature-Max:

    85 °C

  • Operating Temperature-Min:

    -40 °C

  • Package Body Material:

    UNSPECIFIED

  • Package Code:

    HVQCCN

  • Package Shape:

    SQUARE

  • Package Style:

    CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE

  • Peak Reflow Temperature (Cel):

    260

  • Qualification Status:

    Not Qualified

  • Seated Height-Max:

    1 mm

  • Settling Time-Nom (tstl):

    0.011 µs

  • Supply Voltage-Nom:

    3.3 V

  • Surface Mount:

    YES

  • Technology:

    CMOS

  • Temperature Grade:

    INDUSTRIAL

  • Terminal Finish:

    Matte Tin (Sn) - annealed

  • Terminal Form:

    NO LEAD

  • Terminal Pitch:

    0.5 mm

  • Terminal Position:

    QUAD

  • Time@Peak Reflow Temperature-Max (s):

    30

  • Width:

    7 mm

MAX5883EGM+D Frequently Asked Questions (FAQs)

  • A good PCB layout for the MAX5883EGM+D involves keeping the analog and digital grounds separate, using a solid ground plane, and placing the device close to the signal sources. Additionally, it's recommended to use a 4-layer PCB with a dedicated power plane and to avoid routing digital signals under the device.
  • The differential outputs of the MAX5883EGM+D should be terminated with a 100Ω differential load to ensure maximum signal integrity. The termination resistors should be placed as close to the receiver as possible, and the traces should be kept short and matched to minimize signal reflections.
  • The maximum cable length supported by the MAX5883EGM+D depends on the specific application and the type of cable used. However, as a general rule, the device can support cable lengths of up to 100 meters at data rates of up to 3.2 Gbps. Longer cable lengths may be possible at lower data rates.
  • The MAX5883EGM+D can be configured for a specific data rate by setting the appropriate values for the RX_RATE_SEL and TX_RATE_SEL pins. The datasheet provides a table that shows the recommended pin settings for different data rates. Additionally, the device can be configured using the SPI interface to set the data rate and other parameters.
  • The power consumption of the MAX5883EGM+D depends on the specific application and the data rate. However, the typical power consumption is around 350 mW. To reduce power consumption, the device can be put into a low-power mode by setting the PWDNB pin high. Additionally, the power consumption can be reduced by using a lower supply voltage and by optimizing the PCB layout to minimize power losses.

Trust Checks

This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

MAX5883EGM+D Overview

Use the download button to access the MAX5883EGM+D schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like MAX58, or try a keyword search, such as Digital to Analog Converters

About Analog Devices

Analog Devices Inc. is a global leader in the design and manufacturing of analog, mixed-signal, and digital signal processing integrated circuits and software solutions for the industrial, automotive, healthcare, communications industries. Analog Devices serves a diverse range of markets including industrial, automotive, healthcare, energy, aerospace, defense, and consumer electronics industries. Analog Devices’ product portfolio includes a wide range of ICs, modules, and subsystems.

Parts related to MAX5883EGM+D

Showing 0 results

Part Image

← Prev Next →
About Us Contact Us Terms of Service Do not sell or share my personal information Privacy Policy Digital Services Act Library Loader Twitter LinkedIn

All content Copyright © 2020, Supplyframe.com. All rights reserved. Back to top ↑

MAX5883EGM+D Alternates

Showing results

Image Part Number Model
Part Image MAX5883EGM+D Maxim Integrated Products

D/A Converter, 1 Func, Parallel, Word Input Loading, 0.011us Settling Time, QCC48
Part Image MAX5883EGM Maxim Integrated Products

D/A Converter, 1 Func, Parallel, Word Input Loading, 0.011us Settling Time, QCC48
Part Image MAX5883EGM-D Maxim Integrated Products

D/A Converter, 1 Func, Parallel, Word Input Loading, 0.011us Settling Time
Part Image MAX5883EGM-TD Maxim Integrated Products

D/A Converter, 1 Func, Parallel, Word Input Loading, 0.011us Settling Time
Part Image MAX5883EGM-T Maxim Integrated Products

D/A Converter, 1 Func, Parallel, Word Input Loading, 0.011us Settling Time
For a full list of alternate parts for MAX5883EGM+D, check out Findchips.com