Vishay provides a recommended PCB layout and land pattern in their application note AN10273, which can be found on their website. Following this layout ensures optimal thermal performance and minimizes electrical noise.
Vishay recommends using a thin layer of thermal interface material (TIM) with a thermal conductivity of at least 1 W/m-K. The TIM should be applied evenly and thinly to the base plate of the device, and the device should be mounted to a heat sink or PCB with a flat, smooth surface.
The maximum allowed torque for the screw terminals is 0.5 Nm (4.4 lbf-in) to avoid damaging the device. It's essential to follow proper torqueing procedures to ensure reliable connections.
While the MCS04020D1332BE100 is designed to be robust, it's still important to consider the vibration specifications in the datasheet. If your application exceeds these specifications, you may need to add additional mechanical support or consider a different device.
Follow Vishay's recommended soldering profile, which can be found in their application note AN10364. Ensure that the peak reflow temperature does not exceed 260°C (500°F) and that the device is not exposed to temperatures above 240°C (464°F) for more than 30 seconds.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
MCS04020D1332BE100 Overview
Use the download button to access the MCS04020D1332BE100 schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like MCS04,
or try a keyword search, such as Thin Film Resistors
