MEJ2S1509SC - Murata Electronics

MEJ2S1509SC Frequently Asked Questions (FAQs)

• What is the recommended land pattern for MEJ2S1509SC?
  Murata recommends a land pattern with a pad size of 1.3mm x 0.8mm, and a spacing of 0.5mm between pads. A detailed land pattern can be found in Murata's application note or by contacting their technical support.
• Can I use the MEJ2S1509SC in a high-temperature environment?
  The MEJ2S1509SC is rated for operation up to 125°C, but it's recommended to derate the voltage and current ratings above 85°C. Consult Murata's reliability handbook or contact their technical support for more information on high-temperature operation.
• How do I handle the MEJ2S1509SC for soldering and rework?
  Murata recommends following the J-STD-020D.1 standard for soldering and rework. Avoid using excessive heat, and ensure the component is properly secured during the soldering process to prevent damage.
• What is the equivalent series resistance (ESR) of the MEJ2S1509SC?
  The ESR of the MEJ2S1509SC is not explicitly stated in the datasheet, but it can be estimated to be around 0.1 ohms based on Murata's similar products. However, for precise ESR values, contact Murata's technical support or consult their application notes.
• Can I use the MEJ2S1509SC in a high-vibration environment?
  The MEJ2S1509SC is designed to withstand moderate vibration, but it's recommended to consult Murata's vibration test report or contact their technical support to determine its suitability for specific vibration environments.