MEJ2S1515SC - Murata Electronics

MEJ2S1515SC Frequently Asked Questions (FAQs)

• What is the recommended land pattern for the MEJ2S1515SC?
  Murata recommends a land pattern with a pad size of 1.3mm x 0.8mm and a spacing of 0.5mm between pads. The recommended land pattern can be found in the Murata Land Pattern document.
• Can the MEJ2S1515SC be used in high-temperature applications?
  The MEJ2S1515SC is rated for operation up to 125°C, but it's recommended to derate the voltage and current ratings above 85°C. Consult the datasheet and Murata's reliability handbook for more information.
• How do I handle the MEJ2S1515SC for soldering and rework?
  Murata recommends using a soldering iron with a temperature of 350°C max, and a soldering time of 3 seconds max. For rework, use a hot air rework station with a temperature of 250°C max and an air flow rate of 10L/min max.
• What is the equivalent series resistance (ESR) of the MEJ2S1515SC?
  The ESR of the MEJ2S1515SC is not explicitly stated in the datasheet, but it can be estimated to be around 0.1 ohms based on the impedance characteristics graph.
• Can the MEJ2S1515SC be used in high-frequency applications?
  The MEJ2S1515SC is designed for general-purpose use and is not optimized for high-frequency applications. However, it can be used up to 100 kHz with some derating. Consult the datasheet and Murata's application notes for more information.