SENSITIVITY 90 MILLI VOLT PER KILO PASCAL, TEMPERATURE COMPENSATED
Body Breadth:
11.33 mm
Body Height:
12.95 mm
Body Length or Diameter:
10.66 mm
Linearity (%):
2.5 %
Mounting Feature:
SURFACE MOUNT
Offset-Nom:
0.20V
Operating Current-Max:
10 mA
Operating Temperature-Max:
125 °C
Operating Temperature-Min:
-40 °C
Output Range:
0.20-4.70V
Output Type:
ANALOG VOLTAGE
Package Shape/Style:
RECTANGULAR
Port Type:
BARBED
Pressure Range-Max:
7.25 Psi
Pressure Sensing Mode:
GAGE
Response Time:
1000 µs
Sensors/Transducers Type:
PRESSURE SENSOR,PIEZORESISTIVE
Supply Voltage-Max:
5.25 V
Supply Voltage-Min:
4.75 V
Surface Mount:
YES
Termination Type:
SOLDER
MPXV5050GC6T1 Frequently Asked Questions (FAQs)
The recommended PCB layout for the MPXV5050GC6T1 involves placing the sensor near the edge of the board, with the port facing away from the board. This helps to minimize the effects of thermal gradients and mechanical stress on the sensor. Additionally, it is recommended to use a ground plane under the sensor to reduce noise and electromagnetic interference.
The MPXV5050GC6T1 is a ratiometric sensor, which means that the output voltage is proportional to the supply voltage. Calibration involves applying a known pressure to the sensor and measuring the output voltage. The sensor can be calibrated using a two-point calibration method, where the output voltage is measured at two known pressure points, and the resulting data is used to calculate the sensitivity and offset of the sensor.
The MPXV5050GC6T1 is designed to operate up to 10 bar (145 psi) pressure, but it can withstand up to 15 bar (217 psi) for short periods of time. However, it is not recommended to exceed the maximum rated pressure to avoid damaging the sensor.
The MPXV5050GC6T1 has a built-in temperature sensor that can be used to compensate for temperature effects on the pressure measurement. The temperature sensor output can be used to calculate the temperature coefficient of the pressure sensor, which can then be used to correct the pressure measurement for temperature effects.
The recommended power-on sequence for the MPXV5050GC6T1 is to first apply the supply voltage (VCC) and then the input voltage (VIN). This helps to ensure that the internal voltage regulator is properly initialized before the sensor is powered up.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
MPXV5050GC6T1 Overview
Use the download button to access the MPXV5050GC6T1 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like MPXV5,
or try a keyword search, such as Pressure Sensors
About NXP
NXP Semiconductors is a leading manufacturer of semiconductor devices with a wide range of semiconductor solutions, including microcontrollers, sensors, connectivity solutions, power management ICs, and security solutions. These products are used in a variety of applications such as automotive, industrial automation, smart homes, mobile devices, and more.
NXP Semiconductors is one of the world’s largest semiconductor companies and is headquartered in Eindhoven, the Netherlands.
