MYSGK4R030ERSR - Murata Electronics

MYSGK4R030ERSR Frequently Asked Questions (FAQs)

• What is the recommended land pattern for the MYSGK4R030ERSR?
  Murata recommends a land pattern with a pad size of 2.5mm x 1.5mm, and a spacing of 1.5mm between pads. A detailed land pattern can be found in the Murata's recommended land pattern document.
• How do I handle the thermal considerations for the MYSGK4R030ERSR?
  The MYSGK4R030ERSR has a thermal resistance of 10°C/W. To ensure reliable operation, it's recommended to provide a thermal pad on the PCB, and to use a thermal interface material (TIM) with a thermal conductivity of at least 1 W/m-K. Additionally, ensure good airflow around the component.
• What is the maximum operating temperature range for the MYSGK4R030ERSR?
  The MYSGK4R030ERSR has an operating temperature range of -40°C to +125°C. However, the component's performance and reliability may degrade if operated at the extreme ends of this range. It's recommended to operate the component within the recommended temperature range of -20°C to +85°C for optimal performance.
• How do I ensure the MYSGK4R030ERSR is properly soldered?
  To ensure proper soldering, follow the recommended soldering profile: peak temperature of 260°C, with a dwell time of 10-30 seconds. Use a solder with a melting point of 217°C or higher, and ensure the PCB is designed with a solder mask to prevent solder bridging.
• What is the recommended storage condition for the MYSGK4R030ERSR?
  Store the MYSGK4R030ERSR in a dry, cool place with a temperature range of 5°C to 30°C and humidity below 60%. Avoid exposing the component to direct sunlight, moisture, or extreme temperatures.