0.017 X 0.017 INCH, 0.004 INCH HEIGHT, GREEN, CERAMIC, MICRO-X-4
Country Of Origin:
USA
ECCN Code:
5A991.G
Factory Lead Time:
22 Weeks
Manufacturer:
Qorvo
YTEOL:
6.86
Characteristic Impedance:
50 Ω
Construction:
COMPONENT
Gain:
9 dB
Input Power-Max (CW):
20 dBm
JESD-609 Code:
e3
Mounting Feature:
SURFACE MOUNT
Number of Functions:
1
Number of Terminals:
4
Operating Frequency-Max:
12000 MHz
Operating Temperature-Max:
85 °C
Operating Temperature-Min:
-45 °C
Package Body Material:
CERAMIC
Package Equivalence Code:
SL,4LEAD,.07SQ
Power Supplies:
3.9 V
RF/Microwave Device Type:
WIDE BAND LOW POWER
Surface Mount:
YES
Technology:
BIPOLAR
Terminal Finish:
Matte Tin (Sn)
VSWR-Max:
2.5
NBB-300-T1 Frequently Asked Questions (FAQs)
A 4-layer PCB with a solid ground plane and a separate power plane is recommended. The device should be placed near the edge of the board to minimize signal reflections. A 50-ohm microstrip transmission line should be used to connect the device to the antenna.
The device requires a 5V power supply and a bias current of 300mA. A voltage regulator and a current limiter should be used to ensure stable biasing. The bias voltage should be decoupled with a 10uF capacitor to reduce noise.
A quarter-wave monopole antenna or a dipole antenna with a 50-ohm impedance is recommended. The antenna should be designed to operate at the desired frequency band and should be matched to the device's output impedance.
Use a spectrum analyzer to measure the output power and frequency of the device. Check the bias voltage and current to ensure they are within the recommended range. Verify that the PCB layout and antenna design are correct. Use a thermal camera to check for overheating issues.
The maximum operating temperature of the NBB-300-T1 is 85°C. The device should be mounted on a heat sink to ensure proper heat dissipation.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
NBB-300-T1 Overview
Use the download button to access the NBB-300-T1 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like NBB-3,
or try a keyword search, such as RF/Microwave Amplifiers
About Qorvo
Qorvo is a prominent American semiconductor company that specializes in the design and manufacturing of radio frequency (RF) solutions. The company was formed in 2015 through the merger of TriQuint Semiconductor and RF Micro Devices. Qorvo's product portfolio encompasses a wide range of RF components and semiconductor technologies used in various applications, including wireless communications, aerospace and defense, and IoT (Internet of Things) devices.
