Description:Integrated 1.5 A Switch; Input Voltage Range from 3 V to 40 V; Low Feedback Voltage of 235 mV ; Cycle-by-Cycle Current Limit; No Control Loop Compensation Required ; Frequency of Operation Adjustable up to 250 kHz; Operation With All Ceramic Output Capacitors or No Output Capacitance; Internal Thermal Shutdown with Hysteresis; ON/OFF pin for direct PWM dimming; ON/OFF pin disabling the regulator
The recommended PCB layout for optimal thermal performance involves placing the device on a 2-layer or 4-layer board with a solid ground plane on the bottom layer, and using thermal vias to connect the exposed pad to the ground plane. Additionally, keeping the copper traces wide and short can help to reduce thermal resistance.
To ensure reliable start-up of the NCP3066MNTXG, it is recommended to use a soft-start circuit to limit the inrush current during power-up. Additionally, ensuring that the input voltage rises slowly and monotonically can help to prevent false triggering of the overvoltage protection circuit.
The maximum allowed voltage on the EN pin is 6V. Exceeding this voltage can cause damage to the internal logic circuitry. It is recommended to use a voltage divider or a zener diode to limit the voltage on the EN pin to 5V or less.
The NCP3066MNTXG is rated for operation up to 150°C, but it is recommended to derate the output current and voltage to ensure reliable operation at high temperatures. Additionally, the device should be mounted on a heat sink or a thermally-conductive substrate to help dissipate heat.
To troubleshoot oscillations or instability in the output voltage, check the PCB layout for any signs of parasitic inductance or capacitance that may be causing the oscillation. Ensure that the input and output capacitors are properly sized and placed, and that the feedback loop is properly compensated. Additionally, check the output voltage ripple and ensure that it is within the specified limits.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
NCP3066MNTXG Overview
Use the download button to access the NCP3066MNTXG 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like NCP30,
or try a keyword search, such as Display Drivers
