Diptronics recommends a 2-layer PCB with a solid ground plane on the bottom layer and a thermal relief pattern around the device. A heat sink or thermal pad is also recommended to maintain a junction temperature below 125°C.
Diptronics suggests using a secure mounting method, such as screwing or adhesive, and ensuring the device is properly seated on the PCB. Additionally, consider using a vibration-dampening material or potting the device for added protection.
Diptronics recommends limiting voltage transients to 10% of the rated input voltage (±6V) for a maximum duration of 100ms. Exceeding this may cause damage to the device.
Yes, but with caution. Diptronics recommends using identical devices and ensuring proper thermal management. A current-sharing scheme, such as a resistive divider, is also recommended to prevent uneven current distribution.
The output voltage tolerance is typically ±2% of the nominal output voltage. This tolerance should be considered when designing the system, especially when multiple devices are used in series or parallel configurations.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
NDP-06V Overview
Use the download button to access the NDP-06V 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like NDP-0,
or try a keyword search, such as DIP Switches
