Littelfuse recommends a thermal pad on the bottom of the device, connected to a large copper area on the PCB to dissipate heat efficiently. A minimum of 2 oz copper thickness is recommended, and the thermal pad should be connected to a ground plane to reduce thermal resistance.
Littelfuse recommends using a soldering iron with a temperature of 250°C to 260°C, and a solder with a melting point of 180°C to 190°C. The device should be soldered within 3 seconds to 5 seconds, and the solder joints should be inspected for proper wetting and filleting.
The S6010R has a maximum surge current rating of 100 A, 8/20 μs waveform, as per IEC 61000-4-5. This rating is in addition to the device's continuous current rating of 10 A.
Yes, the S6010R is suitable for high-frequency applications up to 1 GHz. However, the device's performance may degrade at higher frequencies due to parasitic inductance and capacitance. Littelfuse recommends consulting the application notes and simulation models for high-frequency design considerations.
In the event of a fault condition, the S6010R will respond by limiting the current and voltage to prevent damage to the device and the surrounding circuitry. The device will then reset once the fault is cleared, and normal operation will resume.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
S6010R Overview
Use the download button to access the S6010R 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like S6010,
or try a keyword search, such as Silicon Controlled Rectifiers
