Bourns recommends a symmetrical PCB layout with the inductor centered on the board, and the pads should be at least 1.5 mm from the board edge to minimize radiation. Additionally, a solid ground plane underneath the inductor can help reduce EMI.
The SRP2313AA-330M has a maximum operating temperature of 125°C. Ensure good airflow around the inductor, and consider using a thermal pad or heat sink if the ambient temperature exceeds 85°C. Also, avoid overheating during soldering and rework.
The SRF of the SRP2313AA-330M is not explicitly stated in the datasheet, but it can be estimated using the formula: SRF ≈ (1 / (2 * π * √(L * C))), where L is the inductance and C is the parasitic capacitance. For this inductor, the SRF is approximately 150 MHz.
The SRP2313AA-330M is designed to withstand moderate vibration levels, but it's essential to ensure the inductor is properly secured to the PCB using a suitable adhesive or mechanical fastening method to prevent movement and damage.
Consider factors such as the operating frequency, current requirements, and available board space when selecting an inductor. The SRP2313AA-330M is suitable for high-current, low-frequency applications. Consult Bourns' application notes and selection guides for more information.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
SRP2313AA-330M Overview
Use the download button to access the SRP2313AA-330M 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like SRP23,
or try a keyword search, such as Fixed Inductors
