The maximum collector-emitter voltage (Vce) for the TIP126 is 80V. However, it's recommended to derate the voltage based on the operating temperature and other factors to ensure reliable operation.
The power dissipation of the TIP126 can be calculated using the formula: Pd = (Vce x Ic) + (Vbe x Ib), where Vce is the collector-emitter voltage, Ic is the collector current, Vbe is the base-emitter voltage, and Ib is the base current. Make sure to check the maximum power dissipation rating (Pd) in the datasheet, which is 65W for the TIP126.
The minimum base current required to turn on the TIP126 depends on the collector current and the desired switching speed. As a general rule, a base current of 1/10 to 1/20 of the collector current is sufficient. However, it's recommended to consult the datasheet and application notes for more specific guidance.
The TIP126 is not suitable for high-frequency switching applications due to its relatively slow switching times (turn-on time: 2us, turn-off time: 3us). It's recommended to use a faster switching transistor or a dedicated high-frequency switch for such applications.
To protect the TIP126 from overheating, ensure that the device is properly heat-sinked, and the ambient temperature is within the recommended operating range. You can also use thermal monitoring and shutdown circuits to prevent overheating. Additionally, follow proper PCB design and layout practices to minimize thermal resistance.
Trust Checks
This model has been provided by an expert contributor.
Expert Contribution
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
TIP126 Overview
Use the download button to access the TIP126 schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like TIP12,
or try a keyword search, such as Other Transistors
