3D Models
Note! To download footprints and symbols, use the build and request forms below
Request (48 hours)
- Datasheet Download Datasheet
- Stock & Prices $ Price & Stock for TSOP32338
- Part Number TSOP32338
- Manufacturer Vishay
- Pin Count 3
- Last Modified Date Feb 10, 2025 10:37 AM UTC
- Pinout / Pin List Click Here (Member Only)
TSOP32338 Details
-
Manufacturer Part Number:
TSOP32338
-
Rohs Code:
Yes
-
Part Life Cycle Code:
Active
-
Factory Lead Time:
12 Weeks
-
Manufacturer:
Vishay Intertechnologies
-
YTEOL:
7.75
-
Additional Feature:
HIGH IMMUNITY
-
Application:
REMOTE CONTROL
-
Configuration:
SINGLE
-
Infrared Range:
YES
-
Mounting Feature:
THROUGH HOLE MOUNT
TSOP32338 Frequently Asked Questions (FAQs)
-
A good PCB layout for the TSOP32338 involves keeping the input and output traces as short as possible, using a solid ground plane, and minimizing the distance between the photodiode and the amplifier. A 4-layer PCB with a dedicated ground plane is recommended.
-
The TSOP32338 requires a single 5V power supply. Ensure that the power supply is clean and well-regulated, and that the voltage is within the recommended range of 4.5V to 5.5V. Also, ensure that the input voltage is within the recommended range of 0V to 3.5V.
-
The TSOP32338 is rated for operation from -40°C to 85°C. However, it's recommended to operate the device within a temperature range of 0°C to 70°C for optimal performance and reliability.
-
The TSOP32338 has built-in ESD protection, but it's still recommended to follow proper ESD handling procedures when handling the device. Use an ESD wrist strap or mat, and ensure that the device is stored in an ESD-safe environment.
-
Store the TSOP32338 in a dry, cool place, away from direct sunlight and moisture. The recommended storage temperature range is -40°C to 30°C, and the recommended humidity range is 20% to 80% RH.
Trust Checks
Trust Score Unavailable
TSOP32338 Overview
Use the download button to access the TSOP32338 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
