Part Image

TW2815-TA1-GR - Renesas Electronics

Description: The TW2815 includes four high quality NTSC/PAL video decoders that convert analog composite video signals to digital component YCbCr data for security applications. The TW2815 contains four 10 bit ADCs and proprietary clamp and gain controllers and utilizes 4H comb filters for separating luminance & chrominance to reduce cross noise artifacts. The TW2815 adopts image enhancement techniques such as IF compensation filter, CTI and programmable peaking. The TW2815 also includes an audio CODEC which has four au

Download TW2815-TA1-GR Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
PCB Footprints
TW2815-TA1-GR - Renesas Electronics PCB footprint - Quad Flat Packages - Quad Flat Packages - 100Pins TQPF-+
click to zoom
3D Models
TW2815-TA1-GR - Renesas Electronics  - 3D model - Quad Flat Packages - 100Pins TQPF-+
click to zoom

TW2815-TA1-GR Details

  • Manufacturer Part Number:

    TW2815-TA1-GR

  • Brand Name:

    Renesas

  • Pbfree Code:

    Yes

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Obsolete

  • Part Package Code:

    TQFP

  • Pin Count:

    100

  • Manufacturer Package Code:

    Q100.12X12A

  • ECCN Code:

    EAR99

  • HTS Code:

    8542.39.00.60

  • Manufacturer:

    Renesas Electronics Corporation

  • YTEOL:

    0

  • Consumer IC Type:

    CONSUMER CIRCUIT

  • JESD-609 Code:

    e3

  • Moisture Sensitivity Level:

    3

  • Packing Method:

    TRAY

  • Terminal Finish:

    Matte Tin (Sn)

TW2815-TA1-GR Frequently Asked Questions (FAQs)

  • A 4-layer PCB with a solid ground plane and a separate power plane is recommended. Keep the analog and digital signal traces separate and avoid crossing them over each other. Use a decoupling capacitor (e.g., 10uF) close to the power pin and a series resistor (e.g., 10Ω) for the analog input.
  • Use a reliable clock source, ensure proper signal termination, and implement error detection and correction mechanisms (e.g., CRC, checksum) in your communication protocol. Also, follow the recommended I2C bus specifications and avoid bus contention.
  • The maximum cable length depends on the signal frequency, cable quality, and noise environment. As a general guideline, keep the cable length below 10 meters for frequencies up to 100 kHz. Use shielded cables and consider using a buffer amplifier or repeater for longer cable lengths.
  • Use a metal shield or a shielded enclosure for the TW2815-TA1-GR. Ensure proper grounding and decoupling of the device. Implement EMI filtering (e.g., RC filters) on the analog input and output signals. Follow the recommended PCB layout and design guidelines for EMI and EMC compliance.
  • Power up the device in the following sequence: VCC, AVCC, and then the analog input signal. Ensure that the power supply is stable and within the recommended voltage range before applying the analog input signal.

Trust Checks

This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

TW2815-TA1-GR Overview

Use the download button to access the TW2815-TA1-GR schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like TW281, or try a keyword search, such as Other Consumer ICs

Parts related to TW2815-TA1-GR

Showing 0 results