Part Image

X9C102SZT1 - Renesas Electronics

Description: The X9C102, X9C103, X9C104, X9C503 are Intersil's digitally controlled (XDCP) potentiometers. The device consists of a resistor array, wiper switches, a control section, and non-volatile memory. The wiper position is controlled by a three-wire interface. The potentiometer is implemented by a resistor array composed of 99 resistive elements and a wiper switching network. Between each element and at either end are tap points accessible to the wiper terminal. The position of the wiper element is controlled by

Download X9C102SZT1 Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
PCB Footprints
X9C102SZT1 - Renesas Electronics PCB footprint - Small Outline Packages - Small Outline Packages - M8.15E
click to zoom
3D Models
X9C102SZT1 - Renesas Electronics  - 3D model - Small Outline Packages - M8.15E
click to zoom

X9C102SZT1 Details

  • Manufacturer Part Number:

    X9C102SZT1

  • Brand Name:

    Renesas

  • Pbfree Code:

    Yes

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Part Package Code:

    SOICN

  • Package Description:

    SOIC-8

  • Pin Count:

    8

  • Manufacturer Package Code:

    M8.15E

  • Country Of Origin:

    Thailand

  • ECCN Code:

    EAR99

  • HTS Code:

    8542.39.00.60

  • Factory Lead Time:

    18 Weeks

  • Manufacturer:

    Renesas Electronics Corporation

  • YTEOL:

    5

  • Control Interface:

    INCREMENT/DECREMENT

  • Converter Type:

    DIGITAL POTENTIOMETER

  • JESD-30 Code:

    R-PDSO-G8

  • JESD-609 Code:

    e3

  • Length:

    4.9022 mm

  • Moisture Sensitivity Level:

    1

  • Number of Functions:

    1

  • Number of Positions:

    100

  • Number of Terminals:

    8

  • Operating Temperature-Max:

    70 °C

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    SOP

  • Package Shape:

    RECTANGULAR

  • Package Style:

    SMALL OUTLINE

  • Peak Reflow Temperature (Cel):

    260

  • Resistance Law:

    LINEAR

  • Resistance Tolerance-Max:

    20%

  • Resistor Terminal Voltage-Max:

    5 V

  • Resistor Terminal Voltage-Min:

    -5 V

  • Seated Height-Max:

    1.7272 mm

  • Supply Voltage-Nom:

    5 V

  • Surface Mount:

    YES

  • Technology:

    CMOS

  • Temperature Coefficient-Nom:

    600 ppm/°C

  • Temperature Grade:

    COMMERCIAL

  • Terminal Finish:

    Matte Tin (Sn) - annealed

  • Terminal Form:

    GULL WING

  • Terminal Pitch:

    1.27 mm

  • Terminal Position:

    DUAL

  • Time@Peak Reflow Temperature-Max (s):

    30

  • Total Resistance-Nom:

    1000 Ω

  • Width:

    3.9116 mm

X9C102SZT1 Frequently Asked Questions (FAQs)

  • The recommended operating voltage range for the X9C102SZT1 is 2.7V to 5.5V, although it can tolerate a voltage range of 1.8V to 6.0V for short periods.
  • To properly initialize the X9C102SZT1, you need to perform a power-on reset (POR) by applying a voltage within the recommended operating range, then wait for the internal reset timer to expire (typically 10ms). After that, you can start sending commands to the device.
  • The X9C102SZT1 supports a maximum clock frequency of 400 kHz for the I²C interface.
  • To enter sleep mode, send the 'sleep' command (0x00) to the device. The device will enter a low-power state, and all internal registers will be retained. To wake up the device, send a valid I²C command or cycle the power supply.
  • The internal EEPROM is used to store the wiper position and other configuration data. The EEPROM is non-volatile, meaning it retains its data even when power is removed.

Trust Checks

This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

X9C102SZT1 Overview

Use the download button to access the X9C102SZT1 schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like X9C10, or try a keyword search, such as Digital Potentiometers

Parts related to X9C102SZT1

Showing 0 results

X9C102SZT1 Alternates

Showing results

Image Part Number Model
Part Image X9C102SIT3 Intersil Corporation

Digital Potentiometer, 1 Func, 1000ohm, Increment/decrement Control Interface, 100 Positions, CMOS, PDSO8

Part Image X9C102S Intersil Corporation

Digital Potentiometer, 1 Func, 1000ohm, Increment/decrement Control Interface, 100 Positions, CMOS, PDSO8

Part Image X9C102ST2 Xicor Inc

Digital Potentiometer, 1 Func, 1000ohm, Increment/decrement Control Interface, 100 Positions, CMOS, PDSO8

Part Image X9C102SC7975 Intersil Corporation

Digital Potentiometer, 1 Func, 1000ohm, Increment/decrement Control Interface, 100 Positions, CMOS, PDSO8

Part Image X9C102SIT1C7898 Intersil Corporation

Digital Potentiometer, 1 Func, 1000ohm, Increment/decrement Control Interface, 100 Positions, CMOS, PDSO8

For a full list of alternate parts for X9C102SZT1, check out Findchips.com