Description:The ZL8800 is a dual output or dual phase digital DC/DC controller. Each output can operate independently or be used together in a dual phase configuration for high current applications. The ZL8800 supports a wide range of output voltages (0. 54V to 5. 5V) operating from input voltages as low as 4. 5V up to 14V. With the fully digital ChargeMode™ control, the ZL8800 will respond to a transient load step within a single switching cycle. This unique compensation-free modulation technique allows designs to mee
Renesas provides a recommended PCB layout guide in their application note (R16AN0334EJ0100) which includes thermal design considerations, such as copper pour, thermal vias, and component placement, to ensure optimal thermal performance.
The ZL8800ALAFTK has built-in OCP and OVP features. To implement these features, refer to the datasheet (Section 7.3 and 7.4) for configuration and programming details. Additionally, Renesas provides an application note (R16AN0335EJ0100) that provides guidance on implementing OCP and OVP in digital power supplies.
Renesas recommends using low-ESR, high-frequency capacitors (e.g., ceramic or film capacitors) with a minimum capacitance of 10uF and a voltage rating of 25V or higher. Place the input capacitors as close as possible to the VIN pin to minimize noise and ensure stable operation.
The ZL8800ALAFTK can be configured using the I2C interface to set output voltage and current limits. Refer to the datasheet (Section 8.1) for register mapping and configuration details. Renesas also provides a software development kit (SDK) and evaluation board to simplify the configuration process.
The thermal derating curve is provided in the datasheet (Figure 14). The curve shows the maximum output current reduction as a function of ambient temperature. To ensure reliable operation, the output current must be derated according to the thermal derating curve to prevent overheating and damage to the device.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
ZL8800ALAFTK Overview
Use the download button to access the ZL8800ALAFTK schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like ZL880,
or try a keyword search, such as Switching Regulator or Controllers
