0402YA6R0DAT2A - Kyocera AVX

0402YA6R0DAT2A Frequently Asked Questions (FAQs)

• What is the recommended land pattern for this capacitor?
  The recommended land pattern for the 0402YA6R0DAT2A capacitor is a rectangular pad with a size of 0.5mm x 0.3mm, with a non-solder mask defined (NSMD) pad shape. This can be found in the Kyocera AVX Components' recommended land pattern document.
• How do I handle the capacitor's moisture sensitivity?
  The 0402YA6R0DAT2A capacitor is a moisture-sensitive device (MSD) and requires special handling and storage procedures to prevent damage. It's recommended to store the components in a dry environment with a relative humidity of 10% or less, and to follow the IPC/JEDEC J-STD-033 standard for handling and storage of MSDs.
• What is the capacitor's equivalent series resistance (ESR) at high frequencies?
  The ESR of the 0402YA6R0DAT2A capacitor at high frequencies is not explicitly stated in the datasheet. However, according to Kyocera AVX Components' application notes, the ESR of this capacitor is typically around 0.1 ohms at 100 kHz and 0.5 ohms at 1 MHz. For more accurate information, it's recommended to contact Kyocera AVX Components' technical support or refer to their spice models.
• Can I use this capacitor in a high-temperature environment?
  The 0402YA6R0DAT2A capacitor is rated for operation up to 125°C, but its performance may degrade at high temperatures. It's recommended to derate the capacitor's voltage and current ratings according to the temperature derating curve provided in the datasheet. For applications above 125°C, it's recommended to consult with Kyocera AVX Components' technical support or consider using a high-temperature-rated capacitor.
• How do I ensure the capacitor's reliability in a high-vibration environment?
  To ensure the reliability of the 0402YA6R0DAT2A capacitor in a high-vibration environment, it's recommended to follow Kyocera AVX Components' guidelines for vibration testing and to use a robust mounting method, such as using a epoxy-based adhesive or a mechanical clamp. Additionally, it's recommended to perform vibration testing according to the IEC 60068-2-6 standard.