Description:DFK-MC 1,5/ 7-GF-3,81 - Feed-through header, nominal cross section: 1.5 mm<sup>2</sup>, color: green, nominal current: 8 A, rated voltage (III/2): 160 V, contact surface: Sn, contact connection type: Pin, number of potentials: 7, number of rows: 1, number of positions: 7, number of connections: 7, product range: DFK-MC 1,5/..-GF, pitch: 3.81 mm, connection method: Solder/Slip-on connection, mounting: Direct mounting, pin layout: Linear pinning, solder pin [P]: 9.4 mm, number of solder pins per potential: 1,
The recommended torque is 0.6 Nm to 1.2 Nm, depending on the specific application and panel material. It's essential to consult the installation instructions and follow the recommended torque to ensure a secure connection.
Yes, the 1829390 connector is designed to withstand vibrations and shocks. It meets the requirements of IEC 61373 Category 2, which means it can operate in environments with vibrations up to 15 g and shocks up to 30 g. However, it's crucial to ensure proper installation and secure fastening to maintain the connector's integrity.
The 1829390 connector has a IP67 rating, which means it's protected against dust and water ingress. It can operate in temperatures ranging from -40°C to 100°C. However, it's essential to consider additional protection measures, such as conformal coating or potting, if the connector will be exposed to extreme environmental conditions, such as high humidity, salt spray, or UV radiation.
While it's technically possible to use a different wire gauge or type, it's not recommended. The 1829390 connector is designed to work with specific wire gauges and types, as specified in the datasheet. Using a different wire gauge or type may compromise the connector's performance, reliability, and safety. It's essential to follow the recommended specifications to ensure a reliable connection.
To ensure proper wire termination and strain relief, follow the recommended wire stripping and termination procedures. Use the correct wire stripping tool to remove the insulation, and then insert the wire into the connector's wire clamp. Make sure to secure the wire with the wire clamp and apply the recommended torque. Additionally, use a strain relief method, such as a cable tie or zip tie, to prevent the wire from being pulled out of the connector.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
1829390 Overview
Use the download button to access the 1829390 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like 18293,
or try a keyword search, such as Terminals and Terminal Blocks
About Phoenix Contact
Phoenix Contact is a market leader in industrial automation and connectivity solutions headquartered in Germany. They manufacture terminal blocks, relays, connectors, power supplies, controllers, networking devices, and surge suppression devices for many applications. Phoenix Contact provides innovative solutions for the automotive / e-mobility, building, rail and city infrastructure, power and energy, and industrial industries.
