The maximum operating temperature range for the 2N3704 is -55°C to 150°C, but it's recommended to operate within -40°C to 125°C for optimal performance and reliability.
While the 2N3704 can be used as a switch, it's not recommended for high-frequency applications (>100 kHz) due to its relatively high transition frequency (ft) of 300 MHz. For high-frequency switching, consider using a transistor with a higher ft, such as the 2N5551 or 2N5401.
To ensure the 2N3704 is fully turned on or off in a digital circuit, make sure to provide a base current (Ib) that is at least 1/10th of the collector current (Ic) and use a base resistor (Rb) that is sufficiently small to minimize the voltage drop across it. A general rule of thumb is to use Rb ≤ (Vcc - Vbe) / (10 * Ic), where Vcc is the supply voltage and Vbe is the base-emitter voltage.
The 2N3704 is not ideal for use in a linear amplifier circuit due to its relatively low current gain (hFE) of 100-300 and high collector-emitter saturation voltage (Vce(sat)) of 0.5-1.5V. For linear amplifier applications, consider using a transistor with a higher hFE and lower Vce(sat), such as the 2N3904 or 2N4401.
The 2N3704 has a maximum collector-emitter voltage (Vceo) of 40V, so it's not suitable for high-voltage applications (>40V). For high-voltage applications, consider using a transistor with a higher Vceo, such as the 2N5551 or 2N5401.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
2N3704 Overview
Use the download button to access the 2N3704 schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like 2N370,
or try a keyword search, such as Small Signal Bipolar Transistors
