ROHM recommends a 4-layer PCB with a solid ground plane and a separate power plane for the amplifier. The input and output traces should be kept short and away from noise sources. A sample PCB layout is available in the application note.
To ensure accuracy, the PT100 sensor should be calibrated before use. The 2SAR552PT100 has a built-in calibration circuit, but it's recommended to perform an external calibration using a precision temperature source. Additionally, the sensor should be installed in a thermally stable environment, away from heat sources and air currents.
The maximum cable length for the PT100 sensor depends on the cable type and the desired accuracy. As a general rule, ROHM recommends keeping the cable length below 10 meters to minimize errors due to cable resistance. For longer cable lengths, a 4-wire connection or a dedicated temperature transmitter should be used.
Yes, the 2SAR552PT100 is designed to operate in high-vibration environments. However, it's recommended to follow proper mounting and installation procedures to ensure the device is securely fastened to the PCB and the PT100 sensor is properly attached to the measurement point.
ROHM provides a troubleshooting guide in the application note, which covers common issues and their solutions. Additionally, engineers can use a logic analyzer or oscilloscope to debug the device and identify the root cause of the issue.
Trust Checks
This model has been provided by an expert contributor.
Expert Contribution
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
2SAR552PT100 Overview
Use the download button to access the 2SAR552PT100 schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like 2SAR5,
or try a keyword search, such as Small Signal Bipolar Transistors
