ROHM recommends a thermal pad on the bottom of the package, connected to a large copper area on the PCB to dissipate heat efficiently. A minimum of 2oz copper thickness and a thermal relief pattern are also recommended.
The 2SAR586JGTLL requires a stable input voltage (VCC) and a proper biasing circuit to ensure optimal performance. A decoupling capacitor (e.g., 10uF) should be placed close to the VCC pin, and a bias resistor (e.g., 1kΩ) should be used to set the desired output voltage.
The maximum power dissipation for the 2SAR586JGTLL is 1.5W. Exceeding this limit can cause the device to overheat, leading to reduced performance or even damage.
The 2SAR586JGTLL is rated for operation up to 125°C (TJ). However, the device's performance and reliability may degrade at higher temperatures. It's essential to ensure proper heat sinking and thermal management to maintain a safe operating temperature.
ROHM recommends using ESD protection devices (e.g., TVS diodes) on the input and output pins to prevent damage from electrostatic discharge. Additionally, handling the device with an anti-static wrist strap or mat can help prevent ESD damage.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
2SAR586JGTLL Overview
Use the download button to access the 2SAR586JGTLL schematic symbol and PCB footprint.
To find more CAD model downloads similar to this part, try a partial part number search, like 2SAR5,
or try a keyword search, such as Power Bipolar Transistors
