The recommended PCB footprint for the 2SC4614S-AN is a standard SOT-223 package with a minimum pad size of 1.5mm x 1.5mm and a thermal pad size of 2.5mm x 2.5mm.
While the 2SC4614S-AN is a high-speed transistor, it is not recommended for high-frequency switching applications above 100 kHz due to its relatively high capacitance and inductance. For high-frequency switching, consider using a transistor with a lower capacitance and inductance, such as the 2SC5242S-AN.
To ensure reliable operation of the 2SC4614S-AN in high-temperature environments, make sure to follow proper thermal management practices, such as using a heat sink, ensuring good airflow, and keeping the junction temperature below 150°C. Additionally, consider using a transistor with a higher temperature rating, such as the 2SC4614S-AN-HR.
Yes, the 2SC4614S-AN can be used in linear amplifier applications due to its high current gain and low saturation voltage. However, ensure that the operating conditions are within the recommended specifications, and consider using a transistor with a higher current rating, such as the 2SC5242S-AN, for higher-power applications.
The recommended storage temperature for the 2SC4614S-AN is -40°C to 125°C. Storage outside of this temperature range may affect the transistor's reliability and performance.
Trust Checks
This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
2SC4614S-AN Overview
Use the download button to access the 2SC4614S-AN schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like 2SC46,
or try a keyword search, such as Small Signal Bipolar Transistors
