ROHM recommends a PCB layout with a thermal pad connected to a large copper area on the bottom layer, and multiple vias to dissipate heat efficiently. A minimum of 2oz copper thickness is recommended.
Ensure that the device is operated within the recommended temperature range (up to 150°C). Use a heat sink or thermal interface material to reduce thermal resistance. Also, consider derating the device's power dissipation at high temperatures.
ROHM recommends a soldering profile with a peak temperature of 260°C, a dwell time of 10-30 seconds, and a cooling rate of 4°C/s or less. Consult the ROHM soldering guide for more details.
Yes, the 2SCR552PFRAT100 is AEC-Q101 qualified and suitable for automotive and high-reliability applications. However, ensure that you follow the recommended design and testing guidelines for these applications.
ROHM recommends using ESD protection devices, such as TVS diodes or ESD arrays, on the input and output pins. Follow proper handling and storage procedures to prevent ESD damage.
Trust Checks
This model has been provided by an expert contributor.
Expert Contribution
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
2SCR552PFRAT100 Overview
Use the download button to access the 2SCR552PFRAT100 schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like 2SCR5,
or try a keyword search, such as Small Signal Bipolar Transistors
